19 open source boards using the 74HC173
Real designs built with the 74HC173, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
8-Bit CPU 32k
slu4coder
196.9 × 125.1 mm101 parts2LNo license184Counter
Velko
62.2 × 21.6 mm65 parts4LMIT16Latest-Full-Backplane
Trilobyte-CPU
100 × 100 mm146 parts4LNo license2PCB EDU
AGH-Logic-Unit
281.2 × 157.9 mm125 parts4LNo license1AOS16 Control Unit
AJain9199
90 × 88 mm121 parts4LNo license1- schematic only · 112 parts
MSAP-1
mehrantsi
112 partsMIT1 Minimal-UART-Computer
slowcorners
191.8 × 121.3 mm109 parts2LNo license0Minimal-UART-CPU-Dev
slowcorners
180.3 × 112.4 mm89 parts2LNo license0Minimal-UART-CPU-FLASH-Edition
tlhconsulting
177.2 × 114.3 mm81 parts2LNo license0VideoRAM
slu4coder
196.9 × 66.7 mm39 parts2LNo license184P2000t ram expansion board
ifilot
110 × 68.1 mm23 parts2LNo license1Alu advanced
ifilot
101.6 × 55.9 mm51 parts2LCERN-OHL-S-2.02Register
Velko
62.2 × 21.6 mm50 parts2LMIT16P2000t ram expansion board-128kb smd
ifilot
110 × 45.5 mm23 parts2LNo license1Alu
ifilot
101.6 × 55.9 mm42 parts2LCERN-OHL-S-2.02Transfer
Velko
62.2 × 21.6 mm47 parts4LMIT16Flags
Velko
62.2 × 21.6 mm42 parts4LMIT16AOS16 Register
AJain9199
36.5 × 47 mm44 parts2LNo license1Display back
Velko
62.2 × 21.6 mm34 parts4LMIT16
How designs wire the 74HC173
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 74HC173 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF.
- The OE1 pin is tied to GND on 8 of 10 designs (a signal on 2).
- The OE2 pin is tied to GND on 8 of 10 designs (a signal on 2).
- The MR pin is tied to GND on 6 of 10 designs (a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OE1pin 1 | Connected to: GND 80% · a signal 20% | — |
| OE2pin 2 | Connected to: GND 80% · a signal 20% | — |
| GNDpin 8 | Connected to: GND 100% | — |
| D3pin 11 | Connected to: 74HC161 50%, 74HC173 50%, 74HC165 40% |
|
| D2pin 12 | Connected to: 74HC161 50%, 74HC173 50%, 74HC165 40% |
|
| D1pin 13 | Connected to: 74HC161 50%, 74HC173 50%, 74HC165 40% |
|
| D0pin 14 | Connected to: 74HC161 50%, 74HC173 50%, 74HC165 40% |
|
| MRpin 15 | Connected to: GND 60% · a signal 40% | — |
| VCCpin 16 | Connected to: 5V 100% |
|
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8-Bit CPU 32k by slu4coder, Counter by Velko, Alu by ifilot and Latest-Full-Backplane by Trilobyte-CPU.
The 74HC173 in open source designs
The gallery holds 19 open source boards using the 74HC173 from 11 GitHub repositories; a typical one measures about 101.6 × 61.3 mm and carries around 51 components.
61% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.
The most starred is 8-Bit CPU 32k by slu4coder.
Parts used alongside the 74HC173
What boards using the 74HC173 are built for
74HC173: common questions
Where can I find a 74HC173 reference design?
Each of the 19 boards on this page is a real design using the 74HC173. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC173 VCC pin?
The VCC pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF. Counted from the KiCad layouts of 10 open source designs using the 74HC173.
How is the 74HC173 OE1 pin connected?
The OE1 pin is tied to GND on 8 of 10 designs (a signal on 2). Counted from the KiCad layouts of 10 open source designs using the 74HC173.
How is the 74HC173 OE2 pin connected?
The OE2 pin is tied to GND on 8 of 10 designs (a signal on 2). Counted from the KiCad layouts of 10 open source designs using the 74HC173.
What parts are used alongside the 74HC173?
The 74HC02, 74HC245, 74HC08, 74HC00 and 74HC04 appear in the most repositories here.
How big is a typical board using the 74HC173?
The median is 101.6 × 61.3 mm, and 61% are two-layer designs.
What is the most popular open source board using the 74HC173?
By GitHub stars, 8-Bit CPU 32k by slu4coder, with 184 stars.
Can I simulate one of these boards using the 74HC173 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.