19 open source boards using the 74HC283

Real designs built with the 74HC283, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

19 boardsClear filters|Most starred

How designs wire the 74HC283

Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the 74HC283 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 15 of 17 designs, most often 100 nF.
GNDpin 8Connected to: GND 100%
VCCpin 16Connected to: 5V 100%
  • Decoupling capacitor on 88% · 100 nF (16)

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Minimal-64x4-Home-Computer by slu4coder, 8-Bit CPU 32k by slu4coder, Minimal-64-Home-Computer by slu4coder and Minimal-UART-Computer-3 by slu4coder.

The 74HC283 in open source designs

The gallery holds 19 open source boards using the 74HC283 from 18 GitHub repositories; a typical one measures about 178.8 × 113.3 mm and carries around 90 components.

94% are two-layer designs, the rest use four layers or more, and 32% carry an open source license.

The most starred is Minimal-64x4-Home-Computer by slu4coder.

Microcontrollers on boards using the 74HC283

What boards using the 74HC283 are built for

74HC283: common questions

Where can I find a 74HC283 reference design?

Each of the 19 boards on this page is a real design using the 74HC283. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HC283 VCC pin?

The VCC pin has a decoupling capacitor on 15 of 17 designs, most often 100 nF. Counted from the KiCad layouts of 17 open source designs using the 74HC283.

What parts are used alongside the 74HC283?

The 74HC86, 74HC00, 74HC245, 74HC08 and 74HC161 appear in the most repositories here.

Which microcontrollers do boards using the 74HC283 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the 74HC283?

The median is 178.8 × 113.3 mm, and 94% are two-layer designs.

What is the most popular open source board using the 74HC283?

By GitHub stars, Minimal-64x4-Home-Computer by slu4coder, with 323 stars.

Can I simulate one of these boards using the 74HC283 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part