19 open source boards using the 74LS367
Real designs built with the 74LS367, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 25 parts
Transputer
nanochess
25 partsBSD-3-Clause92 Multicomp6809
nealcrook
170 × 145 mm115 parts2LNo license63Jupiter-II
ricaflops
164.5 × 89.5 mm122 partsMIT43Tandy-Color-Computer-Multi-Pak
djtersteegc
203.4 × 139.1 mm62 parts2LMIT16Betadisk clone
alvaroalea
99.7 × 149.9 mm83 parts2LNo license7Pedisk2
mnaberez
143.3 × 77.5 mm43 parts2LNo license3- schematic only · 278 parts
ARCADE
antongale
278 parts2LNo license3 Peoples permacomputer
genossen
208.3 × 146.1 mm121 parts2LCustom license2Lomax ColorMagic Redux
RichCini
254 × 137.7 mm148 parts4LNo license1M6809-multicomputer
cartheur
170 × 145 mm111 parts2LMIT1LogicBoard
RedlabsDE
100 × 50 mm64 parts2LNo license0GIMIX DMA Floppy
roberto314
248.9 × 139.7 mm124 parts2LBSD-2-Clause1Processor attempt 4
ethanjamesauto
229.9 × 83.8 mm291 parts2LNo license1Commodore CP/M Cartridge
schenkmi
105 × 130 mm51 parts2LGPL-3.00Northstar PIO
abzman
76.3 × 147.3 mm39 parts2LUnlicense4ESP32
ESP32Breakout
deltaphi
81.3 × 59.7 mm27 parts2LGPL-3.02GIMIX Ghost 6800
roberto314
228.6 × 142.2 mm74 parts2LBSD-2-Clause1ACE-COLOUR2
flypie
165.1 × 114.3 mm95 parts2LGPL-3.013GIMIX DMA SASI
roberto314
249.9 × 140.7 mm71 parts2LBSD-2-Clause1
How designs wire the 74LS367
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the 74LS367 connects to, and the resistors, capacitors and other passives placed on it.
- The OEA pin is tied to GND on 9 of 15 designs (a signal on 5).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OEApin 1 | Connected to: GND 60% · a signal 33% | — |
| I1pin 2 | Connected to: A connector 53% |
|
| I2pin 4 | Connected to: A connector 40% |
|
| GNDpin 8 | Connected to: GND 100% | — |
| I6pin 14 | Connected to: A connector 27% |
|
| VCCpin 16 | Connected to: 5V 100% |
|
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Multicomp6809 by nealcrook, Jupiter-II by ricaflops, Tandy-Color-Computer-Multi-Pak by djtersteegc and ACE-COLOUR2 by flypie.
The 74LS367 in open source designs
The gallery holds 19 open source boards using the 74LS367 from 17 GitHub repositories; a typical one measures about 170 × 139.1 mm and carries around 83 components.
94% are two-layer designs, the rest use four layers or more, and 58% carry an open source license.
The most starred is Transputer by nanochess.
Parts used alongside the 74LS367
Microcontrollers on boards using the 74LS367
What boards using the 74LS367 are built for
74LS367: common questions
Where can I find a 74LS367 reference design?
Each of the 19 boards on this page is a real design using the 74LS367. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LS367 OEA pin connected?
The OEA pin is tied to GND on 9 of 15 designs (a signal on 5). Counted from the KiCad layouts of 15 open source designs using the 74LS367.
What parts are used alongside the 74LS367?
The 74LS74, 74LS32, 74LS174, 74LS08 and 74LS138 appear in the most repositories here.
Which microcontrollers do boards using the 74LS367 use?
Most are built on ESP32 (1).
How big is a typical board using the 74LS367?
The median is 170 × 139.1 mm, and 94% are two-layer designs.
What is the most popular open source board using the 74LS367?
By GitHub stars, Transputer by nanochess, with 92 stars.
Can I simulate one of these boards using the 74LS367 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.