8 open source boards using the 8288

Real designs built with the 8288, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the 8288

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 8288 connects to, and the resistors, capacitors and other passives placed on it.

  • The IOB pin is tied to GND on 6 of 6 designs.
  • The MCE/PDEN pin is left unconnected on 6 of 6 designs.
  • The IOWC pin is left unconnected on 5 of 6 designs.
IOBpin 1Connected to: GND 100%
CLKpin 2Connected to: 8088 50%, 8087 33%
  • Series resistor on 33% · 27 Ω (1), 33 Ω (1)
MRDCpin 7Connected to: A connector 33%
  • Pull-up to 5V on 33% · 4.7 kΩ (1), 2.2 kΩ (1)
  • Series resistor on 33% · 4.7 kΩ (1), 33 Ω (1)
AMWCpin 8Connected to: A connector 33% · not connected 17%
  • Pull-up to 5V on 33% · 4.7 kΩ (1), 2.2 kΩ (1)
  • Series resistor on 33% · 4.7 kΩ (1), 33 Ω (1)
GNDpin 10Connected to: GND 100%
IOWCpin 11Connected to: Not connected 83% · a signal 17%
AIOWCpin 12Connected to: A connector 33% · not connected 33%
  • Pull-up to 5V on 33% · 4.7 kΩ (1), 2.2 kΩ (1)
  • Series resistor on 33% · 4.7 kΩ (1), 33 Ω (1)
IORCpin 13Connected to: A connector 50% · not connected 17%
  • Pull-up to 5V on 33% · 4.7 kΩ (1), 2.2 kΩ (1)
  • Series resistor on 33% · 4.7 kΩ (1), 33 Ω (1)
INTApin 14Connected to: 8259A 67%
  • Pull-up to 5V on 33% · 4.7 kΩ (2)
MCE/PDENpin 17Connected to: Not connected 100%
VCCpin 20Connected to: 5V 100%

9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DubaiXTClone by spencer-uk, Mad5160 by madcatse, Chameleon schematics by Seequa-Computer-Preservation and 8088-MicroATX-Computer by CPTforever.

The 8288 in open source designs

The gallery holds 8 open source boards using the 8288 from 7 GitHub repositories; a typical one measures about 263.8 × 215.9 mm and carries around 154 components.

57% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is DubaiXTClone by spencer-uk.

Microcontrollers on boards using the 8288

What boards using the 8288 are built for

8288: common questions

Where can I find a 8288 reference design?

Each of the 8 boards on this page is a real design using the 8288. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 8288 IOB pin connected?

The IOB pin is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 8288.

How is the 8288 MCE/PDEN pin connected?

The MCE/PDEN pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 8288.

How is the 8288 IOWC pin connected?

The IOWC pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 8288.

What parts are used alongside the 8288?

The 8087, 8088, 8259A, 8284 and 74LS175 appear in the most repositories here.

Which microcontrollers do boards using the 8288 use?

Most are built on PIC (1).

How big is a typical board using the 8288?

The median is 263.8 × 215.9 mm, and 57% are two-layer designs.

What is the most popular open source board using the 8288?

By GitHub stars, DubaiXTClone by spencer-uk, with 8 stars.

Can I simulate one of these boards using the 8288 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part