8 open source boards using the 8253
Real designs built with the 8253, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Chameleon schematics
Seequa-Computer-Preservation
435 × 317.5 mm361 parts2LNo license3- schematic only · 69 parts
Yaufp8088
fifteenhex
69 partsGPL-3.01 Excalibur64
Cptscorcher
209 × 175 mm125 parts2LGPL-3.00SBC 8080 ECB
sladek
160.5 × 100.2 mm111 parts2LNo license0- schematic only · 59 parts
Jbecrtctrl
ngdrascal
59 partsMIT0 8086
homebrew8088
216.4 × 106.7 mm42 parts2LGPL-3.0278088
homebrew8088
132 × 73.9 mm22 parts2LGPL-3.023880188
homebrew8088
143 × 73.9 mm18 parts2LGPL-3.0238
How designs wire the 8253
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 8253 connects to, and the resistors, capacitors and other passives placed on it.
- The OUT1 pin is left unconnected on 3 of 5 designs (a signal on 2).
- The G0 pin has a capacitor to GND on 2 of 5 designs, most often 100 nF.
- The G0 pin has a series resistor on 2 of 5 designs, most often 10 kΩ.
- The G1 pin has a capacitor to GND on 2 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| G0pin 11 | Connected to: Signal 60% · 5V 40% |
|
| GNDpin 12 | Connected to: GND 100% | — |
| OUT1pin 13 | Connected to: Not connected 60% · a signal 40% | — |
| G1pin 14 | Connected to: Signal 60% · 5V 40% |
|
| VCCpin 24 | Connected to: VCC 60% · a signal 40% |
|
19 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 80188 by homebrew8088, 8086 by homebrew8088, Chameleon schematics by Seequa-Computer-Preservation and Excalibur64 by Cptscorcher.
The 8253 in open source designs
The gallery holds 8 open source boards using the 8253 from 7 GitHub repositories; a typical one measures about 184.8 × 103.4 mm and carries around 64 components.
100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is 8088 by homebrew8088.
Parts used alongside the 8253
What boards using the 8253 are built for
8253: common questions
Where can I find a 8253 reference design?
Each of the 8 boards on this page is a real design using the 8253. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 8253 OUT1 pin connected?
The OUT1 pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the 8253.
How is the 8253 G0 pin connected?
The G0 pin has a capacitor to GND on 2 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the 8253.
How is the 8253 G1 pin connected?
The G1 pin has a capacitor to GND on 2 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the 8253.
What parts are used alongside the 8253?
The 74LS245, 8251, 8259, 8284 and 74HC161 appear in the most repositories here.
How big is a typical board using the 8253?
The median is 184.8 × 103.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the 8253?
By GitHub stars, 8088 by homebrew8088, with 238 stars.
Can I simulate one of these boards using the 8253 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.