23 open source boards using the A4988

Real designs built with the A4988, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

23 boardsClear filters|Most starred

The A4988 in open source designs

The gallery holds 23 open source boards using the A4988 from 19 GitHub repositories; a typical one measures about 94.5 × 70.5 mm and carries around 27 components.

90% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.

The most starred is L0 stepper driver by Luos-io.

Parts used alongside the A4988

Microcontrollers on boards using the A4988

A4988: common questions

Where can I find a A4988 reference design?

Each of the 23 boards on this page is a real design using the A4988. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the A4988?

The AP1117-33, Arduino_Nano_v3.x and MPU6050 appear in the most repositories here.

Which microcontrollers do boards using the A4988 use?

Most are built on AVR/Arduino (7), ESP32 (3), NXP (1) and Raspberry Pi (1).

How big is a typical board using the A4988?

The median is 94.5 × 70.5 mm, and 90% are two-layer designs.

What is the most popular open source board using the A4988?

By GitHub stars, L0 stepper driver by Luos-io, with 547 stars.

Can I simulate one of these boards using the A4988 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part