10 open source boards using the ATF22V10
Real designs built with the ATF22V10, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
HW VGA
daveho
150 × 90 mm75 parts2LNo license19
Sbc6120-rbc front panel submini
djtersteegc
200.7 × 106.7 mm100 parts2LGPL-2.06- schematic only · 207 parts
DeskPro386 16
breadboardinglabs
207 partsMIT4 
RP2040/RP2350We816-mark2
danwerner21
360.1 × 141.4 mm128 parts2LNo license1
Cpu board 03
sim82
99.1 × 94.2 mm63 parts2LMIT1
SBC6120 Mini Front Panel
198.1 × 121.3 mm96 parts2LGPL-2.06
ByteCradle 6502 TINY
ifilot
100.3 × 99.7 mm36 parts2LGPL-3.05
Cpu board 03 4l
99.1 × 94.2 mm62 parts4LMIT1
Cpu board 02
119.4 × 91.4 mm58 parts2LMIT1
Pcb01 4l
119.4 × 91.4 mm58 parts4LMIT1
The ATF22V10 in open source designs
The gallery holds 10 open source boards using the ATF22V10 from 6 GitHub repositories; a typical one measures about 119.4 × 94.2 mm and carries around 69 components.
78% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is HW VGA by daveho.
Parts used alongside the ATF22V10
Microcontrollers on boards using the ATF22V10
What boards using the ATF22V10 are built for
ATF22V10: common questions
Where can I find a ATF22V10 reference design?
Each of the 10 boards on this page is a real design using the ATF22V10. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ATF22V10?
The 27C512, 74ALS163, 74HCT574, 74LS138 and 74LS244 appear in the most repositories here.
Which microcontrollers do boards using the ATF22V10 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the ATF22V10?
The median is 119.4 × 94.2 mm, and 78% are two-layer designs.
What is the most popular open source board using the ATF22V10?
By GitHub stars, HW VGA by daveho, with 19 stars.
Can I simulate one of these boards using the ATF22V10 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.