12 open source boards using the 74LS06N

Real designs built with the 74LS06N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the 74LS06N

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 74LS06N connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 8 of 10 designs, most often 100 nF (then 10 nF).
  • Pin 12 has a pull-up to 5V on 6 of 10 designs, most often 1 kΩ (then 4.7 kΩ).
  • Pin 8 has a pull-up to 5V on 5 of 10 designs, most often 1 kΩ (then 4.7 kΩ).
  • Pin 4 has a pull-up to 9V on 4 of 10 designs, most often 1.5 kΩ (then 1 kΩ).
Pin 2Connected to: A connector 40% · not connected 30%
  • Pull-up to 5V on 30% · 1 kΩ (3)
Pin 4Connected to: A connector 20% · not connected 20%
  • Pull-up to 9V on 40% · 1.5 kΩ (2), 1 kΩ (1), 10 kΩ (1)
Pin 6Connected to: A connector 30%, 8501 20% · not connected 20%
  • Pull-up to 5V on 40% · 1 kΩ (4), 2.2 kΩ (1)
GNDpin 7Connected to: GND 100%
Pin 8Connected to: A connector 30%, 8501 20%, 658C16 20% · not connected 30%
  • Pull-up to 5V on 50% · 1 kΩ (2), 4.7 kΩ (2), 2.2 kΩ (1)
Pin 10Connected to: Not connected 50% · a signal 50%
  • Pull-up to 5V on 30% · 1 kΩ (2), 2.2 kΩ (1)
Pin 12Connected to: 6551 20%, 74LS175 20%, 8501 20% · not connected 30%
  • Pull-up to 5V on 60% · 1 kΩ (3), 4.7 kΩ (2), 10 kΩ (1)
VCCpin 14Connected to: 5V 100%
  • Decoupling capacitor on 80% · 100 nF (7), 10 nF (1)

6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Commodore Plus 4 by baldengineer, USB Flash/EPROM Programmer by robsonsmartins, Dragon64 by danwerner21 and We816 by danwerner21.

The 74LS06N in open source designs

The gallery holds 12 open source boards using the 74LS06N from 10 GitHub repositories; a typical one measures about 284.7 × 150.1 mm and carries around 128 components.

100% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is Commodore Plus 4 by baldengineer.

Microcontrollers on boards using the 74LS06N

74LS06N: common questions

Where can I find a 74LS06N reference design?

Each of the 12 boards on this page is a real design using the 74LS06N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LS06N VCC pin?

The VCC pin has a decoupling capacitor on 8 of 10 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 10 open source designs using the 74LS06N.

What pull-up resistor is used on the 74LS06N pin 12?

Pin 12 has a pull-up to 5V on 6 of 10 designs, most often 1 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 10 open source designs using the 74LS06N.

What pull-up resistor is used on the 74LS06N pin 8?

Pin 8 has a pull-up to 5V on 5 of 10 designs, most often 1 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 10 open source designs using the 74LS06N.

What parts are used alongside the 74LS06N?

The 74LS04, 4164, 6551, 74LS139 and 74LS244 appear in the most repositories here.

Which microcontrollers do boards using the 74LS06N use?

Most are built on RP2040/RP2350 (3) and AVR/Arduino (1).

How big is a typical board using the 74LS06N?

The median is 284.7 × 150.1 mm, and 100% are two-layer designs.

What is the most popular open source board using the 74LS06N?

By GitHub stars, Commodore Plus 4 by baldengineer, with 442 stars.

Can I simulate one of these boards using the 74LS06N before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part