25 open source boards using the TPS7A2030PDBVR

Real designs built with the TPS7A2030PDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

25 boardsClear filters|Most starred

How designs wire the TPS7A2030PDBVR

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TPS7A2030PDBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The IN pin is tied to 3.3V on 8 of 9 designs.
  • The EN pin is tied to 3.3V on 6 of 9 designs (a signal on 3).
  • The OUT pin is tied to 3V on 6 of 9 designs (a signal on 3).
INpin 1Connected to: 3.3V 89%
GNDpin 2Connected to: GND 100%
ENpin 3Connected to: 3.3V 67% · a signal 33%
NCpin 4Connected to: Not connected 100%
OUTpin 5Connected to: 3V 67% · a signal 33%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Moto gps rev a1 by mx3353672833-debug, Heli avionics by 1-max-1, StratosCore by pantojinho and PomeloCore-KiCad by robouden.

The TPS7A2030PDBVR in open source designs

The gallery holds 25 open source boards using the TPS7A2030PDBVR from 9 GitHub repositories; a typical one measures about 60 × 51.6 mm and carries around 118 components.

92% use four copper layers or more, and 44% carry an open source license.

The most starred is Moto gps rev a1 by mx3353672833-debug.

Microcontrollers on boards using the TPS7A2030PDBVR

TPS7A2030PDBVR: common questions

Where can I find a TPS7A2030PDBVR reference design?

Each of the 25 boards on this page is a real design using the TPS7A2030PDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS7A2030PDBVR IN pin connected?

The IN pin is tied to 3.3V on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the TPS7A2030PDBVR.

How is the TPS7A2030PDBVR EN pin connected?

The EN pin is tied to 3.3V on 6 of 9 designs (a signal on 3). Counted from the KiCad layouts of 9 open source designs using the TPS7A2030PDBVR.

How is the TPS7A2030PDBVR OUT pin connected?

The OUT pin is tied to 3V on 6 of 9 designs (a signal on 3). Counted from the KiCad layouts of 9 open source designs using the TPS7A2030PDBVR.

What parts are used alongside the TPS7A2030PDBVR?

The TXU0202DCUR, TPD2EUSB30DRTR, TUSB320LAIRWBR, BQ25185DLHR and BQ25628ERYKR appear in the most repositories here.

Which microcontrollers do boards using the TPS7A2030PDBVR use?

Most are built on STM32 (11), Nordic nRF (8), ESP32 (3) and AVR/Arduino (1).

How big is a typical board using the TPS7A2030PDBVR?

The median is 60 × 51.6 mm, and 8% are two-layer designs.

What is the most popular open source board using the TPS7A2030PDBVR?

By GitHub stars, Moto gps rev a1 by mx3353672833-debug, with 320 stars.

Can I simulate one of these boards using the TPS7A2030PDBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part