4 open source boards using the MCP1824T-1802E

Real designs built with the MCP1824T-1802E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filtersOpen license only|Most starred Recently updated Most components

The MCP1824T-1802E in open source designs

The gallery holds 4 open source boards using the MCP1824T-1802E from 4 GitHub repositories; a typical one measures about 56.5 × 99.8 mm and carries around 86 components.

100% use four copper layers or more, and 75% carry an open source license.

The most starred is Bitaxe by skot.

Parts used alongside the MCP1824T-1802E

Microcontrollers on boards using the MCP1824T-1802E

ESP32 3

What boards using the MCP1824T-1802E are built for

MCP1824T-1802E: common questions

Where can I find a MCP1824T-1802E reference design?

Each of the 4 boards on this page is a real design using the MCP1824T-1802E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the MCP1824T-1802E?

The 25MHZ, MCP1824T-0802E, BM1366_MODE1, DS4432U+ and EMC2101 appear in the most repositories here.

Which microcontrollers do boards using the MCP1824T-1802E use?

Most are built on ESP32 (3).

How big is a typical board using the MCP1824T-1802E?

The median is 56.5 × 99.8 mm, and 0% are two-layer designs.

What is the most popular open source board using the MCP1824T-1802E?

By GitHub stars, Bitaxe by skot, with 1,372 stars.

Can I simulate one of these boards using the MCP1824T-1802E before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.