8 open source boards using the TPS40305

Real designs built with the TPS40305, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the TPS40305

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TPS40305 connects to, and the resistors, capacitors and other passives placed on it.

  • The EN/SS pin has a capacitor to GND on 7 of 8 designs, most often 3.3 nF.
  • The PGOOD pin has a pull-up to 3.3V on 7 of 8 designs, most often 10 kΩ.
  • The COMP pin has a series capacitor on 7 of 8 designs, most often 180 pF (then 1.5 nF).
  • The FB pin has a series capacitor on 7 of 8 designs, most often 180 pF (then 470 pF).
VDDpin 1Connected to: 5V 100%
  • Decoupling capacitor on 63% · 1 µF (5)
EN/SSpin 2Connected to: Signal 88%
  • Capacitor to GND on 88% · 3.3 nF (7)
PGOODpin 3Connected to: The microcontroller 88%
  • Pull-up to 3.3V on 88% · 10 kΩ (7)
COMPpin 4Connected to: Signal 88%
  • Series capacitor on 88% · 180 pF (7), 1.5 nF (7)
FBpin 5Connected to: DS4432U+ 88%
  • Series capacitor on 88% · 180 pF (7), 470 pF (7)
  • Series resistor on 88% · 3.83 kΩ (7)
  • Resistor to GND on 88% · 3.32 kΩ (7)
  • Pull-up to VDD on 88% · 4.99 kΩ (7)
BOOTpin 6Connected to: Signal 88%
  • Series capacitor on 88% · 100 nF (7)
SWpin 8Connected to: Signal 100%
  • Series capacitor on 88% · 100 nF (7)
  • Inductor on 88% · 150 nH (6)
LDRVpin 9Connected to: Signal 100%
  • Resistor to GND on 88% · 4.12 kΩ (7)
BPpin 10Connected to: Signal 88%
  • Capacitor to GND on 88% · 10 µF (7)
GNDpin 11Connected to: GND 100%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bitaxe by skot, BitaxeUltra by bitaxeorg, BitaxeUltra by BennetLeff and MakerAxe lite by makingdevices.

The TPS40305 in open source designs

The gallery holds 8 open source boards using the TPS40305 from 8 GitHub repositories; a typical one measures about 56.5 × 99.8 mm and carries around 86 components.

75% use four copper layers or more, and 63% carry an open source license.

The most starred is Bitaxe by skot.

Microcontrollers on boards using the TPS40305

What boards using the TPS40305 are built for

TPS40305: common questions

Where can I find a TPS40305 reference design?

Each of the 8 boards on this page is a real design using the TPS40305. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS40305 EN/SS pin connected?

The EN/SS pin has a capacitor to GND on 7 of 8 designs, most often 3.3 nF. Counted from the KiCad layouts of 8 open source designs using the TPS40305.

What pull-up resistor is used on the TPS40305 PGOOD pin?

The PGOOD pin has a pull-up to 3.3V on 7 of 8 designs, most often 10 kΩ. Counted from the KiCad layouts of 8 open source designs using the TPS40305.

How is the TPS40305 COMP pin connected?

The COMP pin has a series capacitor on 7 of 8 designs, most often 180 pF (then 1.5 nF). Counted from the KiCad layouts of 8 open source designs using the TPS40305.

What parts are used alongside the TPS40305?

The 25MHZ, DS4432U+, EMC2101, ESP32-S3-WROOM-1 and INA260 appear in the most repositories here.

Which microcontrollers do boards using the TPS40305 use?

Most are built on ESP32 (7).

How big is a typical board using the TPS40305?

The median is 56.5 × 99.8 mm, and 25% are two-layer designs.

What is the most popular open source board using the TPS40305?

By GitHub stars, Bitaxe by skot, with 1,375 stars.

Can I simulate one of these boards using the TPS40305 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part