5 open source boards using the PCF85263A

Real designs built with the PCF85263A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the PCF85263A

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the PCF85263A connects to, and the resistors, capacitors and other passives placed on it.

  • The OSCI pin has a crystal on 5 of 5 designs, most often 32.768 kHz.
  • The OSCO pin has a crystal on 5 of 5 designs, most often 32.768 kHz.
  • The SDA pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ.
  • The SCL pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ.
OSCIpin 1Connected to: Signal 100%
  • Crystal on 100% · 32.768 kHz (5)
OSCOpin 2Connected to: Signal 100%
  • Crystal on 100% · 32.768 kHz (5)
VBATpin 3Connected to: Signal 60% · 3.3V 40%
  • Capacitor to GND on 80% · 100 nF (4)
TSpin 4Connected to: Not connected 80% · a signal 20%
GNDpin 5Connected to: GND 100%
SDApin 6Connected to: AT24CS64-SSHM 80%, the microcontroller 80%
  • Pull-up to 3.3V on 100% · 10 kΩ (5)
SCLpin 7Connected to: AT24CS64-SSHM 80%, the microcontroller 80%
  • Pull-up to 3.3V on 100% · 10 kΩ (5)
CLKpin 8Connected to: Not connected 100%
INTApin 9Connected to: Not connected 60% · a signal 40%
VDDpin 10Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (5)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SPACEDOS02 by UniversalScientificTechnologies, BATDATUNIT01 by mlab-modules, SPACEDOS01 by UniversalScientificTechnologies and DATALOGGER01 by mlab-modules.

The PCF85263A in open source designs

The gallery holds 5 open source boards using the PCF85263A from 5 GitHub repositories; a typical one measures about 90.9 × 85.8 mm and carries around 120 components.

80% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is SPACEDOS02 by UniversalScientificTechnologies.

Microcontrollers on boards using the PCF85263A

What boards using the PCF85263A are built for

PCF85263A: common questions

Where can I find a PCF85263A reference design?

Each of the 5 boards on this page is a real design using the PCF85263A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the PCF85263A OSCI pin connected?

The OSCI pin has a crystal on 5 of 5 designs, most often 32.768 kHz. Counted from the KiCad layouts of 5 open source designs using the PCF85263A.

How is the PCF85263A OSCO pin connected?

The OSCO pin has a crystal on 5 of 5 designs, most often 32.768 kHz. Counted from the KiCad layouts of 5 open source designs using the PCF85263A.

What pull-up resistor is used on the PCF85263A SDA pin?

The SDA pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the PCF85263A.

What parts are used alongside the PCF85263A?

The ATMEGA1284P-AU, AT24CS64-SSHM, OPA2314, TPS613222ADBV and TS5A4594 appear in the most repositories here.

Which microcontrollers do boards using the PCF85263A use?

Most are built on AVR/Arduino (5).

How big is a typical board using the PCF85263A?

The median is 90.9 × 85.8 mm, and 80% are two-layer designs.

What is the most popular open source board using the PCF85263A?

By GitHub stars, SPACEDOS02 by UniversalScientificTechnologies, with 7 stars.

Can I simulate one of these boards using the PCF85263A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part