7 open source boards using the TS5A4594
Real designs built with the TS5A4594, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
SPACEDOS02
UniversalScientificTechnologies
38 × 200 mm120 parts2LGPL-3.07AVR/Arduino
SPACEDOS01
UniversalScientificTechnologies
93.5 × 48.2 mm79 parts2LGPL-3.05PCRD04
mlab-modules
60.5 × 40.1 mm58 parts2LGPL-3.04PCRD06
mlab-modules
50.3 × 40.1 mm29 parts2LGPL-3.01PCRD03
mlab-modules
80.8 × 40.1 mm161 parts2LGPL-3.00AVR/Arduino
USTSIPIN02
ust-modules
90.9 × 50.3 mm153 parts4LGPL-3.00USBSDREADER01
mlab-modules
70.6 × 50.3 mm43 parts2LNo license0
How designs wire the TS5A4594
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TS5A4594 connects to, and the resistors, capacitors and other passives placed on it.
- The NO pin has a series resistor on 5 of 7 designs, most often 2.2 kΩ (then 100 Ω).
- The IN pin has a series resistor on 5 of 7 designs, most often 10 kΩ (then 1 kΩ).
- The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 10 µF).
- The COM pin has a series capacitor on 4 of 7 designs, most often 2.2 nF (then 1 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| COMpin 1 | Connected to: OPA2314 57%, TS7211 43% |
|
| NOpin 2 | Connected to: Signal 86% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| INpin 4 | Connected to: The microcontroller 43%, a connector 43% |
|
| VCCpin 5 | Connected to: VCC4 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SPACEDOS02 by UniversalScientificTechnologies, SPACEDOS01 by UniversalScientificTechnologies, PCRD04 by mlab-modules and PCRD06 by mlab-modules.
The TS5A4594 in open source designs
The gallery holds 7 open source boards using the TS5A4594 from 7 GitHub repositories; a typical one measures about 70.6 × 48.2 mm and carries around 79 components.
86% are two-layer designs, the rest use four layers or more, and 86% carry an open source license.
The most starred is SPACEDOS02 by UniversalScientificTechnologies.
Parts used alongside the TS5A4594
Microcontrollers on boards using the TS5A4594
What boards using the TS5A4594 are built for
TS5A4594: common questions
Where can I find a TS5A4594 reference design?
Each of the 7 boards on this page is a real design using the TS5A4594. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TS5A4594 NO pin?
The NO pin has a series resistor on 5 of 7 designs, most often 2.2 kΩ (then 100 Ω). Counted from the KiCad layouts of 7 open source designs using the TS5A4594.
What resistor goes on the TS5A4594 IN pin?
The IN pin has a series resistor on 5 of 7 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 7 open source designs using the TS5A4594.
What decoupling capacitors do designs use on the TS5A4594 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the TS5A4594.
What parts are used alongside the TS5A4594?
The OPA2314, ATMEGA1284P-AU, ISL21080DIH312Z-TK 1V25, PCF85263A and TPS613222ADBV appear in the most repositories here.
Which microcontrollers do boards using the TS5A4594 use?
Most are built on AVR/Arduino (3).
How big is a typical board using the TS5A4594?
The median is 70.6 × 48.2 mm, and 86% are two-layer designs.
What is the most popular open source board using the TS5A4594?
By GitHub stars, SPACEDOS02 by UniversalScientificTechnologies, with 7 stars.
Can I simulate one of these boards using the TS5A4594 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.