18 open source boards using the AT24CS64-SSHM

Real designs built with the AT24CS64-SSHM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

18 boardsClear filters|Most starred

How designs wire the AT24CS64-SSHM

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the AT24CS64-SSHM connects to, and the resistors, capacitors and other passives placed on it.

  • The SDA pin has a pull-up to 3.3V on 12 of 14 designs, most often 10 kΩ (then 4.7 kΩ).
  • The SCL pin has a pull-up to 3.3V on 12 of 14 designs, most often 10 kΩ (then 4.7 kΩ).
  • The VCC pin has a decoupling capacitor on 11 of 14 designs, most often 100 nF (then 10 µF).
  • The A1 pin is tied to GND on 11 of 14 designs (a signal on 3).
A1pin 2Connected to: GND 79% · a signal 21%
A2pin 3Connected to: GND 79% · a signal 21%
GNDpin 4Connected to: GND 100%
SDApin 5Connected to: The microcontroller 57%, a connector 50%, PCF85263A 21%
  • Pull-up to 3.3V on 86% · 10 kΩ (6), 4.7 kΩ (2), 2.2 kΩ (1)
SCLpin 6Connected to: The microcontroller 57%, a connector 50%, PCF85263A 21%
  • Pull-up to 3.3V on 86% · 10 kΩ (6), 4.7 kΩ (2), 2.2 kΩ (1)
WPpin 7Connected to: GND 71% · a signal 21%
VCCpin 8Connected to: 3.3V 86%
  • Decoupling capacitor on 79% · 100 nF (13), 10 µF (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mainboard by Cluradev, Printer+Sticks by aslak3, HighPower-Mechaduino by pointhi and Sdmplayer by SL-RU.

The AT24CS64-SSHM in open source designs

The gallery holds 18 open source boards using the AT24CS64-SSHM from 14 GitHub repositories; a typical one measures about 75.7 × 74.8 mm and carries around 87 components.

56% are two-layer designs, the rest use four layers or more, and 61% carry an open source license.

The most starred is Mainboard by Cluradev.

Microcontrollers on boards using the AT24CS64-SSHM

AT24CS64-SSHM: common questions

Where can I find a AT24CS64-SSHM reference design?

Each of the 18 boards on this page is a real design using the AT24CS64-SSHM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the AT24CS64-SSHM SDA pin?

The SDA pin has a pull-up to 3.3V on 12 of 14 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 14 open source designs using the AT24CS64-SSHM.

What pull-up resistor is used on the AT24CS64-SSHM SCL pin?

The SCL pin has a pull-up to 3.3V on 12 of 14 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 14 open source designs using the AT24CS64-SSHM.

What decoupling capacitors do designs use on the AT24CS64-SSHM VCC pin?

The VCC pin has a decoupling capacitor on 11 of 14 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 14 open source designs using the AT24CS64-SSHM.

What parts are used alongside the AT24CS64-SSHM?

The ATMEGA1284P-AU, PCF85263A, USBLC6-2SC6, MIC5504-3.3YM5 and OPA2314 appear in the most repositories here.

Which microcontrollers do boards using the AT24CS64-SSHM use?

Most are built on STM32 (5), AVR/Arduino (4), ESP32 (2) and Microchip SAM (1).

How big is a typical board using the AT24CS64-SSHM?

The median is 75.7 × 74.8 mm, and 56% are two-layer designs.

What is the most popular open source board using the AT24CS64-SSHM?

By GitHub stars, Mainboard by Cluradev, with 118 stars.

Can I simulate one of these boards using the AT24CS64-SSHM before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part