22 open source boards using the TPS613222ADBV

Real designs built with the TPS613222ADBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

22 boardsClear filters|Most starred

How designs wire the TPS613222ADBV

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the TPS613222ADBV connects to, and the resistors, capacitors and other passives placed on it.

  • The SW pin has a inductor on 12 of 13 designs, most often 2.2 µH (then 4.7 µH).
  • The VOUT pin has a capacitor to GND on 12 of 13 designs, most often 22 µF (then 10 µF).
SWpin 1Connected to: Signal 92%
  • Inductor on 92% · 2.2 µH (4), 4.7 µH (4), 1 µH (1)
GNDpin 2Connected to: GND 100%
NCpin 3, 5Connected to: Not connected 85%
VOUTpin 4Connected to: A connector 23% · 5V 38%
  • Capacitor to GND on 92% · 22 µF (9), 10 µF (6), 47 µF (5)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SPACEDOS02 by UniversalScientificTechnologies, Bt nes advantage by aaronperkins, SPACEDOS01 by UniversalScientificTechnologies and Breeze-SmartSensorHub by bluetiger9.

The TPS613222ADBV in open source designs

The gallery holds 22 open source boards using the TPS613222ADBV from 13 GitHub repositories; a typical one measures about 79 × 53.3 mm and carries around 67 components.

68% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.

The most starred is SPACEDOS02 by UniversalScientificTechnologies.

Microcontrollers on boards using the TPS613222ADBV

TPS613222ADBV: common questions

Where can I find a TPS613222ADBV reference design?

Each of the 22 boards on this page is a real design using the TPS613222ADBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS613222ADBV SW pin connected?

The SW pin has a inductor on 12 of 13 designs, most often 2.2 µH (then 4.7 µH). Counted from the KiCad layouts of 13 open source designs using the TPS613222ADBV.

How is the TPS613222ADBV VOUT pin connected?

The VOUT pin has a capacitor to GND on 12 of 13 designs, most often 22 µF (then 10 µF). Counted from the KiCad layouts of 13 open source designs using the TPS613222ADBV.

What parts are used alongside the TPS613222ADBV?

The ATMEGA1284P-AU, OPA2314, PCF85263A, TS5A4594 and AT24CS64-SSHM appear in the most repositories here.

Which microcontrollers do boards using the TPS613222ADBV use?

Most are built on AVR/Arduino (8), STM32 (4), ESP32 (1) and Nordic nRF (1).

How big is a typical board using the TPS613222ADBV?

The median is 79 × 53.3 mm, and 68% are two-layer designs.

What is the most popular open source board using the TPS613222ADBV?

By GitHub stars, SPACEDOS02 by UniversalScientificTechnologies, with 7 stars.

Can I simulate one of these boards using the TPS613222ADBV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part