16 open source boards using the RASPBERRY_PI_ZERO_2_W

Real designs built with the RASPBERRY_PI_ZERO_2_W, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the RASPBERRY_PI_ZERO_2_W

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the RASPBERRY_PI_ZERO_2_W connects to, and the resistors, capacitors and other passives placed on it.

  • The ID_SD pin is left unconnected on 10 of 11 designs.
  • The ID_SC pin is left unconnected on 10 of 11 designs.
  • The 5V_2 pin is tied to 5V on 8 of 12 designs (not connected on 4).
  • The 5V_4 pin is tied to 5V on 8 of 12 designs (not connected on 4).
5V_2pin 2Connected to: 5V 67% · not connected 33%
5V_4pin 4Connected to: 5V 67% · not connected 33%
GND_6pin 6Connected to: GND 100%
GPIO4/GPIO_GCLKpin 7Connected to: Not connected 64% · a signal 36%
GND_9pin 9Connected to: GND 75% · not connected 25%
ID_SDpin 27Connected to: Not connected 91%
ID_SCpin 28Connected to: Not connected 91%
GPIO26pin 37Connected to: Not connected 73% · a signal 27%

32 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hwboard bike computer by axoulc, EtherKraken by karmakrafts, PCB Khess Module Payment by DBXYD and GameboyGo by ArnaanShah.

The RASPBERRY_PI_ZERO_2_W in open source designs

The gallery holds 16 open source boards using the RASPBERRY_PI_ZERO_2_W from 15 GitHub repositories; a typical one measures about 90 × 100 mm and carries around 25 components.

77% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is EtherKraken by karmakrafts.

Parts used alongside the RASPBERRY_PI_ZERO_2_W

Microcontrollers on boards using the RASPBERRY_PI_ZERO_2_W

RASPBERRY_PI_ZERO_2_W: common questions

Where can I find a RASPBERRY_PI_ZERO_2_W reference design?

Each of the 16 boards on this page is a real design using the RASPBERRY_PI_ZERO_2_W. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the RASPBERRY_PI_ZERO_2_W ID_SD pin connected?

The ID_SD pin is left unconnected on 10 of 11 designs. Counted from the KiCad layouts of 12 open source designs using the RASPBERRY_PI_ZERO_2_W.

How is the RASPBERRY_PI_ZERO_2_W ID_SC pin connected?

The ID_SC pin is left unconnected on 10 of 11 designs. Counted from the KiCad layouts of 12 open source designs using the RASPBERRY_PI_ZERO_2_W.

How is the RASPBERRY_PI_ZERO_2_W 5V_2 pin connected?

The 5V_2 pin is tied to 5V on 8 of 12 designs (not connected on 4). Counted from the KiCad layouts of 12 open source designs using the RASPBERRY_PI_ZERO_2_W.

Which microcontrollers do boards using the RASPBERRY_PI_ZERO_2_W use?

Most are built on Raspberry Pi (11), STM32 (3), AVR/Arduino (1) and ESP32 (1).

How big is a typical board using the RASPBERRY_PI_ZERO_2_W?

The median is 90 × 100 mm, and 77% are two-layer designs.

What is the most popular open source board using the RASPBERRY_PI_ZERO_2_W?

By GitHub stars, EtherKraken by karmakrafts, with 3 stars.

Can I simulate one of these boards using the RASPBERRY_PI_ZERO_2_W before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part