4 open source boards using the TLV3011AIDBVR

Real designs built with the TLV3011AIDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The TLV3011AIDBVR in open source designs

The gallery holds 4 open source boards using the TLV3011AIDBVR from 4 GitHub repositories; a typical one measures about 125 × 87 mm and carries around 464 components.

50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is 1v2-boost converter by benkrasnow.

Microcontrollers on boards using the TLV3011AIDBVR

What boards using the TLV3011AIDBVR are built for

TLV3011AIDBVR: common questions

Where can I find a TLV3011AIDBVR reference design?

Each of the 4 boards on this page is a real design using the TLV3011AIDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TLV3011AIDBVR?

The 74LVC1G17W5-7, AT24C512C-SSHD-T, CYPM1321-97BZXIT, INA226AIDGSR and INA237AIDGSR appear in the most repositories here.

Which microcontrollers do boards using the TLV3011AIDBVR use?

Most are built on RP2040/RP2350 (3).

How big is a typical board using the TLV3011AIDBVR?

The median is 125 × 87 mm, and 50% are two-layer designs.

What is the most popular open source board using the TLV3011AIDBVR?

By GitHub stars, 1v2-boost converter by benkrasnow, with 7 stars.

Can I simulate one of these boards using the TLV3011AIDBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part