11 open source boards using the TLV6700DDCR

Real designs built with the TLV6700DDCR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

The TLV6700DDCR in open source designs

The gallery holds 11 open source boards using the TLV6700DDCR from 4 GitHub repositories; a typical one measures about 24 × 42 mm and carries around 61 components.

100% use four copper layers or more, and 91% carry an open source license.

The most starred is Odeck by KarpelesLab.

Microcontrollers on boards using the TLV6700DDCR

What boards using the TLV6700DDCR are built for

TLV6700DDCR: common questions

Where can I find a TLV6700DDCR reference design?

Each of the 11 boards on this page is a real design using the TLV6700DDCR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TLV6700DDCR?

The INA226AIDGSR, 74LVC1G17W5-7, AT24C512C-SSHD-T, CYPM1321-97BZXIT and INA237AIDGSR appear in the most repositories here.

Which microcontrollers do boards using the TLV6700DDCR use?

Most are built on Nordic nRF (8) and RP2040/RP2350 (2).

How big is a typical board using the TLV6700DDCR?

The median is 24 × 42 mm, and 0% are two-layer designs.

What is the most popular open source board using the TLV6700DDCR?

By GitHub stars, Odeck by KarpelesLab, with 0 stars.

Can I simulate one of these boards using the TLV6700DDCR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part