11 open source boards using the TPD4E05U06QDQARQ1
Real designs built with the TPD4E05U06QDQARQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 101 parts
Kria k26-devboard
antmicro
101 partsApache-2.083 Poe usb c pd converter
antmicro
112 × 56 mm199 parts4LApache-2.08Sdi fiber adapter
antmicro
70 × 42 mm140 parts4LApache-2.05STM32
Stm32h7-renode reference platform
antmicro
100 × 60 mm380 parts6LApache-2.01RP2040/RP2350
Audio latency tester board
antmicro
80 × 40 mm201 parts4LApache-2.01- schematic only · 135 parts
Modular agilex5e dc scm
antmicro
135 partsApache-2.01 ESP32
Fibel2
nikolozka
210 × 148 mm434 parts4LNo license0Raspberry Pi
UTDRoboSubCompute
WilliamDATaylor
100 × 100.1 mm51 parts4LMIT0ESP32
SerialTap
tfindlay-au
54 × 22 mm33 parts4LCERN-OHL-P-2.00Jetson Orin Baseboard
AtlasAutoware
120 × 90 mm312 parts8LNo license0ESP32
Zone syntax test
gokcesena53
90 × 55 mm89 parts4LMIT0
How designs wire the TPD4E05U06QDQARQ1
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TPD4E05U06QDQARQ1 connects to, and the resistors, capacitors and other passives placed on it.
- The D1-_2 pin has a series resistor on 4 of 9 designs, most often 22 Ω.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| D1+_1pin 1 | Connected to: A connector 100% |
|
| D1-_2pin 2 | Connected to: A connector 100% |
|
| GND_3pin 3 | Connected to: GND 100% | — |
| GND_8pin 8 | Connected to: GND 100% | — |
| NC_9pin 9 | Connected to: A connector 78% · not connected 22% |
|
| NC_10pin 10 | Connected to: A connector 78% · not connected 22% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Poe usb c pd converter by antmicro, Sdi fiber adapter by antmicro, Audio latency tester board by antmicro and Stm32h7-renode reference platform by antmicro.
The TPD4E05U06QDQARQ1 in open source designs
The gallery holds 11 open source boards using the TPD4E05U06QDQARQ1 from 11 GitHub repositories; a typical one measures about 100 × 56 mm and carries around 140 components.
100% use four copper layers or more, and 82% carry an open source license.
The most starred is Kria k26-devboard by antmicro.
Parts used alongside the TPD4E05U06QDQARQ1
Microcontrollers on boards using the TPD4E05U06QDQARQ1
What boards using the TPD4E05U06QDQARQ1 are built for
TPD4E05U06QDQARQ1: common questions
Where can I find a TPD4E05U06QDQARQ1 reference design?
Each of the 11 boards on this page is a real design using the TPD4E05U06QDQARQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TPD4E05U06QDQARQ1 D1-_2 pin?
The D1-_2 pin has a series resistor on 4 of 9 designs, most often 22 Ω. Counted from the KiCad layouts of 9 open source designs using the TPD4E05U06QDQARQ1.
What parts are used alongside the TPD4E05U06QDQARQ1?
The 74LVC06ABQ, FT4232H-56Q-REEL, 74LVC1G175GV,125, 74LVC2G14GV,125 and 93LC66BT-I/MC appear in the most repositories here.
Which microcontrollers do boards using the TPD4E05U06QDQARQ1 use?
Most are built on ESP32 (3), Raspberry Pi (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the TPD4E05U06QDQARQ1?
The median is 100 × 56 mm, and 0% are two-layer designs.
What is the most popular open source board using the TPD4E05U06QDQARQ1?
By GitHub stars, Kria k26-devboard by antmicro, with 83 stars.
Can I simulate one of these boards using the TPD4E05U06QDQARQ1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.