7 open source boards using the VDA2710NTA(SOT-23)
Real designs built with the VDA2710NTA(SOT-23), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32-EVB Rev J
OLIMEX
75.2 × 74.7 mm157 parts2LApache-2.0287RP2040/RP2350
AgonLight2 Rev A
OLIMEX
106.1 × 64.9 mm237 parts4LGPL-3.0105NXP
RT1010Py
OLIMEX
25.4 × 53.3 mm76 parts4LGPL-3.06ESP32
ESP32-EVB Rev J
fso-dev-man
75.2 × 74.7 mm157 parts2LApache-2.00ESP32
ESP32-EVB Rev K
OLIMEX
75.2 × 74.7 mm157 parts2LApache-2.0287RP2040/RP2350
AgonLight2
OLIMEX
106.1 × 64.9 mm237 parts4LGPL-3.0105ESP32
ESP32-EVB Rev K
fso-dev-man
75.2 × 74.7 mm157 parts2LApache-2.00
The VDA2710NTA(SOT-23) in open source designs
The gallery holds 7 open source boards using the VDA2710NTA(SOT-23) from 4 GitHub repositories; a typical one measures about 75.2 × 74.7 mm and carries around 157 components.
57% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is ESP32-EVB Rev J by OLIMEX.
Parts used alongside the VDA2710NTA(SOT-23)
Microcontrollers on boards using the VDA2710NTA(SOT-23)
What boards using the VDA2710NTA(SOT-23) are built for
VDA2710NTA(SOT-23): common questions
Where can I find a VDA2710NTA(SOT-23) reference design?
Each of the 7 boards on this page is a real design using the VDA2710NTA(SOT-23). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the VDA2710NTA(SOT-23)?
The SY8089AAAC(SOT23-5), CH340T(SSOP20W), BAT54C(SOT23-3), ESP32-WROOM-32E-N4 and LAN8710A-EZC(QFN32) appear in the most repositories here.
Which microcontrollers do boards using the VDA2710NTA(SOT-23) use?
Most are built on ESP32 (4), RP2040/RP2350 (2) and NXP (1).
How big is a typical board using the VDA2710NTA(SOT-23)?
The median is 75.2 × 74.7 mm, and 57% are two-layer designs.
What is the most popular open source board using the VDA2710NTA(SOT-23)?
By GitHub stars, ESP32-EVB Rev J by OLIMEX, with 287 stars.
Can I simulate one of these boards using the VDA2710NTA(SOT-23) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.