23 open source boards using the Teensy3.2
Real designs built with the Teensy3.2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXPSnackymini keyboard
huytd
257.8 × 94 mm91 parts2LNo license32
NXPArcadeTrackballMouse
ManiacalLabs
40.5 × 68 mm12 parts2LNo license28
NXPCore64 LB v0.6
ageppert
85 × 170 mm136 parts2LGPL-3.016
NXPCAN-CCD bus
xerootg
107.7 × 85.1 mm83 parts2LNo license12
AVR/ArduinoNova 1200 front panel
ForgottenMachines
397.5 × 119.4 mm203 parts2LNo license5
NXPV4.2
brunob45
48.9 × 52.7 mm49 parts2LNo license5
NXPDriver
augustt198
54.6 × 127 mm62 parts2LNo license4
NXPPcb bcu2
geertu
106.1 × 91.4 mm86 parts2LNo license3
NXPMidimania
harrisonmg
101.4 × 65.8 mm9 parts2LNo license1
NXPV4.1
48.9 × 52.7 mm48 parts2LNo license5
NXPTeensy carrier
s-bear
56 × 34 mm5 parts2LMIT2
NXPImpact pal
tpcarlson
40.3 × 128.5 mm175 parts2LNo license106
NXPV4.0
48.9 × 52.7 mm43 parts2LNo license5
NXPMegaduino
48.9 × 52.7 mm38 parts2LNo license5
NXPLidarBoard-2025
LesKaribous
68.8 × 76.2 mm14 parts2LMIT1
NXPV3.0
39.4 × 52.1 mm37 parts2LNo license5
NXPLidarBoard-2023
68.8 × 76.2 mm14 parts2LMIT3
NXPV2.0
40 × 52.7 mm36 parts2LNo license5
NXPV2.1
40 × 52.7 mm36 parts2LNo license5
NXPTravelModule-2023
27 × 54 mm7 parts2LMIT3
NXPV2.2
39.4 × 52.1 mm36 parts2LNo license5
Nordic nRFSenseRx rev1
Appiko
96 × 69 mm36 parts2LCERN-OHL-1.22
NXPV1.0
40 × 52.7 mm29 parts2LNo license5
The Teensy3.2 in open source designs
The gallery holds 23 open source boards using the Teensy3.2 from 14 GitHub repositories; a typical one measures about 48.9 × 65.8 mm and carries around 37 components.
100% are two-layer designs, the rest use four layers or more, and 26% carry an open source license.
The most starred is Impact pal by tpcarlson.
Parts used alongside the Teensy3.2
Microcontrollers on boards using the Teensy3.2
What boards using the Teensy3.2 are built for
Teensy3.2: common questions
Where can I find a Teensy3.2 reference design?
Each of the 23 boards on this page is a real design using the Teensy3.2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Teensy3.2 use?
Most are built on NXP (21), AVR/Arduino (1) and Nordic nRF (1).
How big is a typical board using the Teensy3.2?
The median is 48.9 × 65.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the Teensy3.2?
By GitHub stars, Impact pal by tpcarlson, with 106 stars.
Can I simulate one of these boards using the Teensy3.2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.