13 open source boards using the TLV75733PDBV
Real designs built with the TLV75733PDBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Bldc motor cntroller
azmat-bilal
58 × 50 mm130 parts4LMIT111
STM32Faderbay
vonmartins
360 × 140 mm174 parts4LNo license4
NXPEnclosurefinal00
thenfour
59 × 69 mm117 parts2LNo license4
STM32Bny6xv2 pcb rev1
Tsuiha
282.2 × 92.3 mm149 parts2LCC-BY-SA-4.01
ESP32SAVITAR-V2
alexandru-mot
54.9 × 46.3 mm135 parts4LNo license0
RP2040/RP2350ESP-HI-PLUS
dyu134
58 × 35 mm83 parts4LNo license0
ESP32Rubber-Ducky
ishantmahatopro
33 × 90.3 mm49 parts2LNo license0
NXPEnclosurefinal01
59 × 69 mm117 parts2LNo license4
RP2040/RP2350Robot
70.1 × 100 mm78 parts2LNo license0
NXPClarinoid devboard
257 × 174 mm112 parts2LNo license4
RP2040/RP2350ESP-HI-PLUS Desktop Sub module
60 × 43 mm61 parts2LNo license0
NXPClarinoid bodytest
258 × 28 mm106 parts2LNo license4
NXPClarinoid3
544.8 × 236.2 mm32 parts2LNo license4
The TLV75733PDBV in open source designs
The gallery holds 13 open source boards using the TLV75733PDBV from 7 GitHub repositories; a typical one measures about 60 × 69 mm and carries around 112 components.
69% are two-layer designs, the rest use four layers or more, and 15% carry an open source license.
The most starred is Bldc motor cntroller by azmat-bilal.
Parts used alongside the TLV75733PDBV
Microcontrollers on boards using the TLV75733PDBV
What boards using the TLV75733PDBV are built for
TLV75733PDBV: common questions
Where can I find a TLV75733PDBV reference design?
Each of the 13 boards on this page is a real design using the TLV75733PDBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TLV75733PDBV use?
Most are built on NXP (5), RP2040/RP2350 (3), STM32 (3) and ESP32 (2).
How big is a typical board using the TLV75733PDBV?
The median is 60 × 69 mm, and 69% are two-layer designs.
What is the most popular open source board using the TLV75733PDBV?
By GitHub stars, Bldc motor cntroller by azmat-bilal, with 111 stars.
Can I simulate one of these boards using the TLV75733PDBV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.