11 open source boards using the 4024
Real designs built with the 4024, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Euclid Main Board
m0xpd
78 × 108 mm128 parts2LCC-BY-SA-4.07Clockdiv
versusentropy
29.7 × 93.2 mm110 parts2LCustom license3AVR/Arduino
Automata Generator Standard
Sirawit7205
246.4 × 127 mm121 parts2LNo license21802-Mini-1854-Serial
dmadole
100 × 100 mm44 parts2LNo license1Modular sound synthesizer
zetapersei
163.1 × 114 mm97 parts2LGPL-3.00555friend
harrisoncbrammell
97.9 × 113.9 mm38 parts2LNo license0Synclap
Bad-Dog-Designs
71 × 108 mm101 parts2LGPL-2.014AVR/Arduino
VIA I/O Card
rjhelms
99.1 × 78.7 mm69 parts2LNo license2Baud Generator
tangent3D
16.5 × 41 mm6 parts2LMIT10Noise
gehel
92.7 × 82.3 mm76 parts4LNo license0- schematic only · 175 parts
Building blocks
lennartquerter
175 parts2LCC-BY-NC-4.012
How designs wire the 4024
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 4024 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 8 is left unconnected on 9 of 10 designs.
- Pin 10 is left unconnected on 9 of 10 designs.
- Pin 13 is left unconnected on 9 of 10 designs.
- The VDD pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Q6pin 3 | Connected to: Not connected 60% · a signal 40% | — |
| VSSpin 7 | Connected to: GND 90% | — |
| Pin 8 | Connected to: Not connected 90% | — |
| Pin 10 | Connected to: Not connected 90% | — |
| Pin 13 | Connected to: Not connected 90% | — |
| VDDpin 14 | Connected to: 12V 90% |
|
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Synclap by Bad-Dog-Designs, Baud Generator by tangent3D, Euclid Main Board by m0xpd and Clockdiv by versusentropy.
The 4024 in open source designs
The gallery holds 11 open source boards using the 4024 from 11 GitHub repositories; a typical one measures about 95.3 × 104 mm and carries around 97 components.
91% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.
The most starred is Synclap by Bad-Dog-Designs.
Microcontrollers on boards using the 4024
What boards using the 4024 are built for
4024: common questions
Where can I find a 4024 reference design?
Each of the 11 boards on this page is a real design using the 4024. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 4024 pin 8 connected?
Pin 8 is left unconnected on 9 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the 4024.
How is the 4024 pin 10 connected?
Pin 10 is left unconnected on 9 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the 4024.
How is the 4024 pin 13 connected?
Pin 13 is left unconnected on 9 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the 4024.
What parts are used alongside the 4024?
The 4001, 4013, 40106, 4023 and 4049 appear in the most repositories here.
Which microcontrollers do boards using the 4024 use?
Most are built on AVR/Arduino (2).
How big is a typical board using the 4024?
The median is 95.3 × 104 mm, and 91% are two-layer designs.
What is the most popular open source board using the 4024?
By GitHub stars, Synclap by Bad-Dog-Designs, with 14 stars.
Can I simulate one of these boards using the 4024 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.