11 open source boards using the 4164
Real designs built with the 4164, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Dragon64
danwerner21
333.2 × 205.9 mm220 parts2LNo license34Commodore-Plus4
StormTrooper
284.7 × 158.9 mm212 parts2LNo license20CPC464-2MINI
Board-Folk
246.1 × 85 mm156 parts2LNo license10Atari65 130XE C070067
jimbro1000
323.9 × 204 mm327 parts4LNo license4Dragon32Rev3
jimbro1000
253 × 169.1 mm169 parts2LMIT3Commodore Plus 4
baldengineer
284.7 × 158.9 mm212 parts2LCC-BY-4.0442Backup
danwerner21
333.2 × 205.9 mm218 parts2LNo license34EVA1 production
roberto314
218 × 125 mm104 parts2LNo license0Backup1
danwerner21
333.2 × 205.9 mm218 parts2LNo license34CPC464-2MINICAS1
Board-Folk
54.1 × 48 mm19 parts2LNo license108088 ram card - revB
abzman
140.2 × 52.1 mm40 parts2LUnlicense4
How designs wire the 4164
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 4164 connects to, and the resistors, capacitors and other passives placed on it.
- The A0 pin has a series resistor on 6 of 8 designs, most often 22 Ω (then 82 Ω).
- The A2 pin has a series resistor on 6 of 8 designs, most often 22 Ω (then 82 Ω).
- The A1 pin has a series resistor on 6 of 8 designs, most often 22 Ω (then 82 Ω).
- The A7 pin has a series resistor on 6 of 8 designs, most often 22 Ω (then 82 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| WEpin 3 | Connected to: 4164 100%, 6529 25%, 6551 25% |
|
| RASpin 4 | Connected to: 4164 100%, 251641 25%, 8360 25% |
|
| A0pin 5 | Connected to: 4164 100% |
|
| A2pin 6 | Connected to: 4164 100% |
|
| A1pin 7 | Connected to: 4164 100% |
|
| VCCpin 8 | Connected to: 5V 100% |
|
| A7pin 9 | Connected to: 4164 100% |
|
| A5pin 10 | Connected to: 4164 100% |
|
| A4pin 11 | Connected to: 4164 100% |
|
| A3pin 12 | Connected to: 4164 100% |
|
| A6pin 13 | Connected to: 4164 100% |
|
| CASpin 15 | Connected to: 4164 100%, 8360 25% |
|
| GNDpin 16 | Connected to: GND 100% | — |
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Commodore Plus 4 by baldengineer, Dragon64 by danwerner21, Commodore-Plus4 by StormTrooper and CPC464-2MINI by Board-Folk.
The 4164 in open source designs
The gallery holds 11 open source boards using the 4164 from 8 GitHub repositories; a typical one measures about 284.7 × 158.9 mm and carries around 212 components.
91% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.
The most starred is Commodore Plus 4 by baldengineer.
Parts used alongside the 4164
What boards using the 4164 are built for
4164: common questions
Where can I find a 4164 reference design?
Each of the 11 boards on this page is a real design using the 4164. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the 4164 A0 pin?
The A0 pin has a series resistor on 6 of 8 designs, most often 22 Ω (then 82 Ω). Counted from the KiCad layouts of 8 open source designs using the 4164.
What resistor goes on the 4164 A2 pin?
The A2 pin has a series resistor on 6 of 8 designs, most often 22 Ω (then 82 Ω). Counted from the KiCad layouts of 8 open source designs using the 4164.
What resistor goes on the 4164 A1 pin?
The A1 pin has a series resistor on 6 of 8 designs, most often 22 Ω (then 82 Ω). Counted from the KiCad layouts of 8 open source designs using the 4164.
What parts are used alongside the 4164?
The 74LS08, 74LS04, 74LS139, 6551 and 74LS06N appear in the most repositories here.
How big is a typical board using the 4164?
The median is 284.7 × 158.9 mm, and 91% are two-layer designs.
What is the most popular open source board using the 4164?
By GitHub stars, Commodore Plus 4 by baldengineer, with 442 stars.
Can I simulate one of these boards using the 4164 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.