10 open source boards using the 74HC11
Real designs built with the 74HC11, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Linsight
doppelhub
169.3 × 153 mm474 parts4LGPL-3.05AVR/Arduino
Automata Generator Standard
Sirawit7205
246.4 × 127 mm121 parts2LNo license2Ai08-devboard
Sirawit7205
80 × 70 mm65 parts2LCERN-OHL-S-2.02Cisc-8
nailed-barnacle
299.7 × 198.1 mm315 parts2LMIT1CoCoTANG
lfantoniosi
69.1 × 56.6 mm108 parts2LNo license1Dac circ
b3dag
193 × 160 mm149 parts2LNo license0- schematic only · 558 parts
Breadboarding
MihrimatriX
558 partsMIT0 74HCT6526 Board 4
dmolinagarcia
100 × 100 mm76 parts4LNo license14AVR/Arduino
Automata Generator Minimal
Sirawit7205
128.3 × 71.8 mm103 parts2LNo license2MainPowerBoard
ParadigmHyperloop
177.8 × 177.8 mm259 parts2LCustom license11
How designs wire the 74HC11
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 74HC11 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 100% | — |
| PIN_9_9pin 9 | Connected to: 74HC11 38% · not connected 38% |
|
| VCCpin 14 | Connected to: 5V 100% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 74HCT6526 Board 4 by dmolinagarcia, MainPowerBoard by ParadigmHyperloop, Linsight by doppelhub and Ai08-devboard by Sirawit7205.
The 74HC11 in open source designs
The gallery holds 10 open source boards using the 74HC11 from 9 GitHub repositories; a typical one measures about 169.3 × 127 mm and carries around 135 components.
78% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is 74HCT6526 Board 4 by dmolinagarcia.
Parts used alongside the 74HC11
Microcontrollers on boards using the 74HC11
What boards using the 74HC11 are built for
74HC11: common questions
Where can I find a 74HC11 reference design?
Each of the 10 boards on this page is a real design using the 74HC11. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC11 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the 74HC11.
What parts are used alongside the 74HC11?
The 74HC04, 74HC00, 74HC08, 74HC138 and 74HC157 appear in the most repositories here.
Which microcontrollers do boards using the 74HC11 use?
Most are built on AVR/Arduino (3).
How big is a typical board using the 74HC11?
The median is 169.3 × 127 mm, and 78% are two-layer designs.
What is the most popular open source board using the 74HC11?
By GitHub stars, 74HCT6526 Board 4 by dmolinagarcia, with 14 stars.
Can I simulate one of these boards using the 74HC11 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.