4 open source boards using the BM1368_mode1
Real designs built with the BM1368_mode1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Qaxe
shufps
89 × 137 mm192 parts4LCERN-OHL-S-2.0244
ESP32BitaxeSupra
bitaxeorg
56.5 × 99.8 mm89 parts4LCERN-OHL-S-2.034
NerdOCTAXE-Plus
Patsch91
155.5 × 130 mm290 parts4LCERN-OHL-S-2.033
Nerdqaxe+
89 × 152 mm183 parts4LCERN-OHL-S-2.0244
The BM1368_mode1 in open source designs
The gallery holds 4 open source boards using the BM1368_mode1 from 3 GitHub repositories; a typical one measures about 89 × 133.5 mm and carries around 188 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Qaxe by shufps.
Parts used alongside the BM1368_mode1
What boards using the BM1368_mode1 are built for
BM1368_mode1: common questions
Where can I find a BM1368_mode1 reference design?
Each of the 4 boards on this page is a real design using the BM1368_mode1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the BM1368_mode1?
The 25MHZ, MCP1824T-0802E, AP3211, CSD95472Q5MC and EMC2302-1 appear in the most repositories here.
Which microcontrollers do boards using the BM1368_mode1 use?
Most are built on ESP32 (1) and STM32 (1).
How big is a typical board using the BM1368_mode1?
The median is 89 × 133.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the BM1368_mode1?
By GitHub stars, Qaxe by shufps, with 244 stars.
Can I simulate one of these boards using the BM1368_mode1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.