12 open source boards using the DS1233
Real designs built with the DS1233, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Radio-86rk
skiselev
266.7 × 203.2 mm190 parts2LGPL-3.0124Mackerel-30
crmaykish
215 × 150 mm127 parts4LMIT96AVR/Arduino
CortexPC
danwerner21
244 × 244 mm155 parts2LNo license7Z80-CPM
skiselev
101.6 × 53.3 mm28 parts2LCERN-OHL-S-2.046809PC
danwerner21
244 × 244 mm155 parts2LNo license26502PC
danwerner21
244 × 244 mm154 parts2LNo license1RP2040/RP2350
We816-mark2
danwerner21
360.1 × 141.4 mm128 parts2LNo license1SST-6809-V2.2
KenWillmott
100 × 100 mm46 parts4LMIT1Radio-86rk
Vakon84
266.7 × 203.2 mm187 parts2LGPL-3.00Mackerel-10 v1
crmaykish
210 × 170 mm110 parts4LMIT96Z-FIGHTER Mainboard
tangent3D
100 × 150 mm43 parts2LMIT10Mackerel-08 SBC v1
crmaykish
180 × 120 mm81 parts4LMIT96
How designs wire the DS1233
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the DS1233 connects to, and the resistors, capacitors and other passives placed on it.
- The RESET pin has a capacitor to GND on 8 of 10 designs, most often 1 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 90% | — |
| RESETpin 2 | Connected to: 74LS14 30%, 8224/КР580ГФ24 20% |
|
| VCCpin 3 | Connected to: VCC 91% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Radio-86rk by skiselev, Mackerel-08 SBC v1 by crmaykish, Z-FIGHTER Mainboard by tangent3D and CortexPC by danwerner21.
The DS1233 in open source designs
The gallery holds 12 open source boards using the DS1233 from 10 GitHub repositories; a typical one measures about 229.5 × 160 mm and carries around 128 components.
67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Radio-86rk by skiselev.
Parts used alongside the DS1233
Microcontrollers on boards using the DS1233
What boards using the DS1233 are built for
DS1233: common questions
Where can I find a DS1233 reference design?
Each of the 12 boards on this page is a real design using the DS1233. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the DS1233 RESET pin connected?
The RESET pin has a capacitor to GND on 8 of 10 designs, most often 1 nF (then 10 nF). Counted from the KiCad layouts of 10 open source designs using the DS1233.
What parts are used alongside the DS1233?
The 27C256, 74LS244, 74LS245, 74HCT14 and 74LS04 appear in the most repositories here.
Which microcontrollers do boards using the DS1233 use?
Most are built on AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the DS1233?
The median is 229.5 × 160 mm, and 67% are two-layer designs.
What is the most popular open source board using the DS1233?
By GitHub stars, Radio-86rk by skiselev, with 124 stars.
Can I simulate one of these boards using the DS1233 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.