24 open source boards using the ESP32-WROOM-32E-N4
Real designs built with the ESP32-WROOM-32E-N4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Kv4p HT
VanceVagell
38.1 × 82.6 mm87 parts4LGPL-3.0814
ESP32ESP32-GATEWAY Rev I
OLIMEX
50.8 × 62.2 mm98 parts2LApache-2.0320
ESP32ESP32-PoE-ISO
28 × 98.2 mm131 parts4LNo license142
ESP32KRAKE
PubInv
137.2 × 83.8 mm195 parts2LAGPL-3.09
ESP32Board
dshills
120 × 80 mm17 parts2LMIT4
ESP32Kv4p ht-MagSafe
bi4wms
54.5 × 74.8 mm72 parts2LNo license3
ESP32Kv4p HT
ceilingduster
86.4 × 50.2 mm87 parts4LGPL-3.02
ESP32OpenDual-Reader
nuerolynx
36 × 124 mm68 parts6LNo license1
ESP32Filament dryer monitor
alessandrocardelli
91 × 52 mm94 parts4LNo license0
ESP32TableLight
jonny190
110 × 110 mm68 parts2LMIT0
ESP32Kv4p HT
80 × 47 mm87 parts4LGPL-3.0814
ESP32ESP32-GATEWAY Rev H
50.8 × 62.2 mm97 parts2LApache-2.0320
ESP32GeneralPurposeAlarmDevice
137.2 × 83.8 mm177 parts2LAGPL-3.09
ESP32Kv4p HT
38.1 × 82.6 mm87 parts4LGPL-3.02
ESP32Kv4p HT
81.2 × 96.6 mm70 parts4LGPL-3.0814
ESP32Kv4p HT
80 × 47 mm87 parts4LGPL-3.02
ESP32ESP32-PoE Rev M2
28 × 80 mm131 parts4LApache-2.0407
ESP32ESP32-EVB
75.2 × 74.7 mm157 parts2LApache-2.0285
ESP32ESP32-PoE-ISO
28 × 98.2 mm130 parts4LNo license142
ESP32Kv4p HT
81.2 × 96.6 mm70 parts4LGPL-3.02
ESP32ESP32-EVB
75.2 × 74.7 mm156 parts2LApache-2.0285
ESP32ESP32-PoE-ISO
28 × 98.2 mm129 parts4LNo license142
ESP32ESP32-PoE Rev M1
28 × 80 mm130 parts4LApache-2.0407
ESP32ESP32-PoE-ISO
28 × 98.2 mm128 parts4LNo license142
The ESP32-WROOM-32E-N4 in open source designs
The gallery holds 24 open source boards using the ESP32-WROOM-32E-N4 from 12 GitHub repositories; a typical one measures about 64.8 × 81.3 mm and carries around 96 components.
63% use four copper layers or more, and 71% carry an open source license.
The most starred is Kv4p HT by VanceVagell.
Parts used alongside the ESP32-WROOM-32E-N4
Microcontrollers on boards using the ESP32-WROOM-32E-N4
What boards using the ESP32-WROOM-32E-N4 are built for
ESP32-WROOM-32E-N4: common questions
Where can I find a ESP32-WROOM-32E-N4 reference design?
Each of the 24 boards on this page is a real design using the ESP32-WROOM-32E-N4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ESP32-WROOM-32E-N4?
The CH340X(MSOP-10), TPS62A02ADRLR(SOT-563-6), AZ1117H-3.3TRG1, LAN8710A-EZC(QFN32) and CP2102N-A02-GQFN24 appear in the most repositories here.
Which microcontrollers do boards using the ESP32-WROOM-32E-N4 use?
Most are built on ESP32 (24).
How big is a typical board using the ESP32-WROOM-32E-N4?
The median is 64.8 × 81.3 mm, and 38% are two-layer designs.
What is the most popular open source board using the ESP32-WROOM-32E-N4?
By GitHub stars, Kv4p HT by VanceVagell, with 814 stars.
Can I simulate one of these boards using the ESP32-WROOM-32E-N4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.