18 open source boards using the MCP1700
Real designs built with the MCP1700, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32MINI4
antonchromjak
65 × 18 mm151 parts4LNo license139
ESP32Lora node esp32 smd GPS
Christophe45
71.1 × 109.2 mm32 parts2LNo license14
AVR/ArduinoFRReceiverLVH
shaise
27.5 × 14.5 mm33 parts4LGPL-3.013
STM32OpenSkySim
36 × 20 mm33 parts2LLGPL-2.112
STM32Bluz v1
Maniak003
24.9 × 14.9 mm72 parts2LGPL-3.03
PICPerenquen
supernudo
75.8 × 101 mm90 parts2LNo license1
Radar RF
ckflight
42.9 × 24.5 mm138 parts4LGPL-3.055
Radar RF
TonyStark2007
42.9 × 24.5 mm138 parts4LGPL-3.015
AVR/ArduinoFRReceiverTiny
27.5 × 14.5 mm33 parts4LGPL-3.013
STM32Bluz Macropixel
27.9 × 17.2 mm65 parts2LGPL-3.03
AVR/ArduinoProgrammableRelayModule4Channel
numato
91 × 82 mm72 parts2LNo license143
ESP32Loranode esp32 V3
53.3 × 101.6 mm26 parts2LNo license14
AVR/ArduinoFRReceiver8
22 × 23 mm25 parts2LGPL-3.013
ESP8266ESPTiny402
tomtor
26.4 × 23.9 mm15 parts2LGPL-3.04
AVR/ArduinoProgrammableRelayModule2Channel
100 × 60 mm64 parts2LNo license143
ESP8266ESPTiny402-hand-SOT89
26.4 × 23.9 mm15 parts2LGPL-3.04
ESP8266ESPTiny402-SOT89
26.4 × 23.9 mm15 parts2LGPL-3.04
ESP8266ESPTiny402-SOT89-shove
26.4 × 23.9 mm15 parts2LGPL-3.04
The MCP1700 in open source designs
The gallery holds 18 open source boards using the MCP1700 from 10 GitHub repositories; a typical one measures about 31.9 × 23.9 mm and carries around 33 components.
72% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is ProgrammableRelayModule4Channel by numato.
Parts used alongside the MCP1700
Microcontrollers on boards using the MCP1700
What boards using the MCP1700 are built for
MCP1700: common questions
Where can I find a MCP1700 reference design?
Each of the 18 boards on this page is a real design using the MCP1700. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MCP1700?
The 5400BL15B050E, ADF4158, ADL5801, Directional_Coupler and HMC431LP4 appear in the most repositories here.
Which microcontrollers do boards using the MCP1700 use?
Most are built on AVR/Arduino (5), ESP8266 (4), STM32 (4) and ESP32 (2).
How big is a typical board using the MCP1700?
The median is 31.9 × 23.9 mm, and 72% are two-layer designs.
What is the most popular open source board using the MCP1700?
By GitHub stars, ProgrammableRelayModule4Channel by numato, with 143 stars.
Can I simulate one of these boards using the MCP1700 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.