6 open source boards using the MCP1824T-1202E/OT
Real designs built with the MCP1824T-1202E/OT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32BitaxeGamma
bitaxeorg
56.5 × 99.8 mm90 parts4LCERN-OHL-S-2.0418
RP2040/RP2350Emberone00
256foundation
128 × 128 mm316 parts6LCERN-OHL-S-2.045
ESP32BitaxeSupra
56.5 × 99.8 mm89 parts4LCERN-OHL-S-2.034
ESP32Bittyaxe
BeeEvolved
55.5 × 66.9 mm85 parts4LCERN-OHL-S-2.07
ESP32BitaxeBonanza
130 × 112 mm202 parts6LCERN-OHL-S-2.05
ESP32BitaxeGamma
imcmurray
56.5 × 99.8 mm90 parts4LNo license0
The MCP1824T-1202E/OT in open source designs
The gallery holds 6 open source boards using the MCP1824T-1202E/OT from 6 GitHub repositories; a typical one measures about 56.5 × 99.8 mm and carries around 90 components.
100% use four copper layers or more, and 83% carry an open source license.
The most starred is BitaxeGamma by bitaxeorg.
Parts used alongside the MCP1824T-1202E/OT
Microcontrollers on boards using the MCP1824T-1202E/OT
What boards using the MCP1824T-1202E/OT are built for
MCP1824T-1202E/OT: common questions
Where can I find a MCP1824T-1202E/OT reference design?
Each of the 6 boards on this page is a real design using the MCP1824T-1202E/OT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MCP1824T-1202E/OT?
The 25MHZ, SN74AVC4T774, ESP32-S3-WROOM-1, MCP1824T-0802E and TPS546D24ARVFR appear in the most repositories here.
Which microcontrollers do boards using the MCP1824T-1202E/OT use?
Most are built on ESP32 (5) and RP2040/RP2350 (1).
How big is a typical board using the MCP1824T-1202E/OT?
The median is 56.5 × 99.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the MCP1824T-1202E/OT?
By GitHub stars, BitaxeGamma by bitaxeorg, with 418 stars.
Can I simulate one of these boards using the MCP1824T-1202E/OT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.