22 open source boards using the 74LS240
Real designs built with the 74LS240, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RC1802 CPU
tebl
99.1 × 99.1 mm54 parts2LGPL-3.032ALU1 - 副本
Left-Hand
99.7 × 99.7 mm73 parts2LNo license19ISA DualUARTParport
hkzlab
176.5 × 90.2 mm69 parts2LCC-BY-NC-4.018TIM-011B
Board-Folk
232.8 × 204.2 mm149 parts2LNo license86809PC
danwerner21
244 × 244 mm155 parts2LNo license26809 Plus EPROM Version
roberto314
248.9 × 139.7 mm165 parts2LBSD-2-Clause16502PC
danwerner21
244 × 244 mm154 parts2LNo license1MicroKit09 IO
electrickery
99.6 × 95 mm77 parts2LNo license1Et2000
dbalsom
93.7 × 98.4 mm30 parts2LMIT1SBC 8080 ECB
sladek
160.5 × 100.2 mm111 parts2LNo license0SBC80386EX
danwerner21
160 × 100 mm96 parts4LNo license0ALU0
Left-Hand
100 × 100 mm66 parts2LNo license19GIMIX 6809 CPU Plus
roberto314
248.9 × 139.7 mm165 parts2LBSD-2-Clause1Lomax Thunder 186 Redux
RichCini
253.6 × 137.7 mm116 parts4LNo license1LAIR Pro Logic Analyzer Interface for RC2014 Pro Bus
MustBeArt
103.1 × 49.9 mm11 parts2LNo license7RC6802 CPU
tebl
99.1 × 99.1 mm53 parts2LCERN-OHL-1.26GIMIX DMA Floppy
roberto314
248.9 × 139.7 mm124 parts2LBSD-2-Clause1PIC
S10 PIC SPI v1
CatspersCoffee
254 × 134.1 mm163 partsCustom license0- schematic only · 99 parts
TRS80 M2 CPU
trs80-net
99 parts2LNo license0 St225 20427
schlae
136.8 × 199.1 mm212 parts2LNo license38GIMIX Mainboard
roberto314
482.6 × 228.6 mm80 parts2LBSD-2-Clause1GIMIX DMA SASI
roberto314
249.9 × 140.7 mm71 parts2LBSD-2-Clause1
How designs wire the 74LS240
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the 74LS240 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 12 of 16 designs, most often 100 nF.
- The OEA pin is tied to GND on 12 of 16 designs (a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OEApin 1 | Connected to: GND 75% · a signal 25% | — |
| GNDpin 10 | Connected to: GND 100% | — |
| VCCpin 20 | Connected to: VCC 100% |
|
17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include St225 20427 by schlae, RC1802 CPU by tebl, ALU0 by Left-Hand and ISA DualUARTParport by hkzlab.
The 74LS240 in open source designs
The gallery holds 22 open source boards using the 74LS240 from 17 GitHub repositories; a typical one measures about 176.5 × 134.1 mm and carries around 98 components.
90% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.
The most starred is St225 20427 by schlae.
Parts used alongside the 74LS240
Microcontrollers on boards using the 74LS240
What boards using the 74LS240 are built for
74LS240: common questions
Where can I find a 74LS240 reference design?
Each of the 22 boards on this page is a real design using the 74LS240. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS240 VCC pin?
The VCC pin has a decoupling capacitor on 12 of 16 designs, most often 100 nF. Counted from the KiCad layouts of 16 open source designs using the 74LS240.
How is the 74LS240 OEA pin connected?
The OEA pin is tied to GND on 12 of 16 designs (a signal on 4). Counted from the KiCad layouts of 16 open source designs using the 74LS240.
What parts are used alongside the 74LS240?
The 74LS244, 74LS74, 74LS00, 74LS04 and 74LS138 appear in the most repositories here.
Which microcontrollers do boards using the 74LS240 use?
Most are built on PIC (1).
How big is a typical board using the 74LS240?
The median is 176.5 × 134.1 mm, and 90% are two-layer designs.
What is the most popular open source board using the 74LS240?
By GitHub stars, St225 20427 by schlae, with 38 stars.
Can I simulate one of these boards using the 74LS240 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.