8 open source boards using the AT90USB1286-AU

Real designs built with the AT90USB1286-AU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the AT90USB1286-AU

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the AT90USB1286-AU connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 4 has a series resistor on 8 of 8 designs, most often 22 Ω.
  • Pin 5 has a series resistor on 8 of 8 designs, most often 22 Ω.
  • Pin 7 has a capacitor to GND on 8 of 8 designs, most often 1 µF.
  • Pin 23 has a crystal on 8 of 8 designs, most often 16 MHz.
Pin 2Connected to: Not connected 63% · a signal 38%
Pin 3Connected to: 5V 88%
  • Decoupling capacitor on 75% · 100 nF (3), 10 µF (1), 4.7 µF (1)
Pin 4Connected to: Signal 100%
  • Series resistor on 100% · 22 Ω (7)
Pin 5Connected to: Signal 100%
  • Series resistor on 100% · 22 Ω (7)
Pin 6Connected to: GND 100%
Pin 7Connected to: Signal 100%
  • Capacitor to GND on 100% · 1 µF (7)
Pin 8Connected to: 5V 88%
  • Decoupling capacitor on 88% · 100 nF (3), 10 µF (2), 4.7 µF (1)
Pin 9Connected to: Not connected 100%
Pin 18Connected to: Not connected 75% · a signal 25%
Pin 19Connected to: Not connected 75% · a signal 25%
Pin 20Connected to: A connector 63%
  • Pull-up to 5V on 88% · 10 kΩ (5), 47 kΩ (1), 1 kΩ (1)
Pin 21Connected to: 5V 100%
  • Decoupling capacitor on 75% · 100 nF (5)
Pin 22Connected to: GND 100%
Pin 23Connected to: Signal 100%
  • Crystal on 100% · 16 MHz (6)
  • Capacitor to GND on 100% · 22 pF (7)
Pin 24Connected to: Signal 100%
  • Crystal on 100% · 16 MHz (6)
  • Capacitor to GND on 100% · 22 pF (7)
Pin 25Connected to: Not connected 75% · a signal 25%
Pin 26Connected to: Not connected 63% · a signal 38%
Pin 27Connected to: Not connected 63% · a signal 38%
  • Pull-up to 5V on 38% · 270 Ω (2), 10 kΩ (1)
Pin 33Connected to: Not connected 75% · a signal 25%
Pin 34Connected to: Not connected 75% · a signal 25%
Pin 43Connected to: Signal 100%
  • Resistor to GND on 100% · 1 kΩ (4), 10 kΩ (3)
Pin 52Connected to: 5V 100%
  • Decoupling capacitor on 63% · 100 nF (4)
Pin 53Connected to: GND 100%
Pin 62Connected to: Not connected 50% · 5V 25% · a signal 25%
  • Capacitor to GND on 50% · 100 nF (4)
Pin 63Connected to: GND 100%
Pin 64Connected to: 5V 100%
  • Decoupling capacitor on 75% · 100 nF (6)

38 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MegaMIDI by AidanHockey5, Model-M-Type-C by ashpil, Genny by superjoebob and Wired sculpt pcb by chadaustin.

The AT90USB1286-AU in open source designs

The gallery holds 8 open source boards using the AT90USB1286-AU from 8 GitHub repositories; a typical one measures about 101.2 × 100 mm and carries around 80 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is MegaMIDI by AidanHockey5.

Microcontrollers on boards using the AT90USB1286-AU

What boards using the AT90USB1286-AU are built for

AT90USB1286-AU: common questions

Where can I find a AT90USB1286-AU reference design?

Each of the 8 boards on this page is a real design using the AT90USB1286-AU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the AT90USB1286-AU pin 4?

Pin 4 has a series resistor on 8 of 8 designs, most often 22 Ω. Counted from the KiCad layouts of 8 open source designs using the AT90USB1286-AU.

What resistor goes on the AT90USB1286-AU pin 5?

Pin 5 has a series resistor on 8 of 8 designs, most often 22 Ω. Counted from the KiCad layouts of 8 open source designs using the AT90USB1286-AU.

How is the AT90USB1286-AU pin 7 connected?

Pin 7 has a capacitor to GND on 8 of 8 designs, most often 1 µF. Counted from the KiCad layouts of 8 open source designs using the AT90USB1286-AU.

What parts are used alongside the AT90USB1286-AU?

The 4050, H11L1, LD1117S33TR_SOT223, LD1117S50TR_SOT223 and LM2733XMF appear in the most repositories here.

Which microcontrollers do boards using the AT90USB1286-AU use?

Most are built on AVR/Arduino (8).

How big is a typical board using the AT90USB1286-AU?

The median is 101.2 × 100 mm, and 100% are two-layer designs.

What is the most popular open source board using the AT90USB1286-AU?

By GitHub stars, MegaMIDI by AidanHockey5, with 116 stars.

Can I simulate one of these boards using the AT90USB1286-AU before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part