6 open source boards using the WC1602A

Real designs built with the WC1602A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the WC1602A

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the WC1602A connects to, and the resistors, capacitors and other passives placed on it.

  • The LED(+) pin is tied to 5V on 4 of 5 designs.
  • The LED(-) pin is tied to GND on 4 of 5 designs.
  • The D0 pin is left unconnected on 3 of 5 designs (a signal on 2).
  • The D1 pin is left unconnected on 3 of 5 designs (a signal on 2).
VSSpin 1Connected to: GND 100%
VDDpin 2Connected to: 5V 100%
D0pin 7Connected to: Not connected 60% · a signal 40%
D1pin 8Connected to: Not connected 60% · a signal 40%
D2pin 9Connected to: Not connected 60% · a signal 40%
D3pin 10Connected to: Not connected 60% · a signal 40%
LED(+)pin 15Connected to: 5V 80% · a signal 20%
LED(-)pin 16Connected to: GND 80% · a signal 20%

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 6502-Computer-PCB by The-Invent0r, 6502-wozmon by tsanders30004, Chronolog by slemanz and 6502 Computer by DomAtTheShack.

The WC1602A in open source designs

The gallery holds 6 open source boards using the WC1602A from 5 GitHub repositories; a typical one measures about 186 × 114.2 mm and carries around 51 components.

67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is 6502-Computer-PCB by The-Invent0r.

Microcontrollers on boards using the WC1602A

WC1602A: common questions

Where can I find a WC1602A reference design?

Each of the 6 boards on this page is a real design using the WC1602A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the WC1602A LED(+) pin connected?

The LED(+) pin is tied to 5V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the WC1602A.

How is the WC1602A LED(-) pin connected?

The LED(-) pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the WC1602A.

How is the WC1602A D0 pin connected?

The D0 pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the WC1602A.

What parts are used alongside the WC1602A?

The 28C256, 6551, 74HC00, 74HC166 and CY62256-70PC appear in the most repositories here.

Which microcontrollers do boards using the WC1602A use?

Most are built on AVR/Arduino (4) and STM32 (1).

How big is a typical board using the WC1602A?

The median is 186 × 114.2 mm, and 67% are two-layer designs.

What is the most popular open source board using the WC1602A?

By GitHub stars, 6502-Computer-PCB by The-Invent0r, with 31 stars.

Can I simulate one of these boards using the WC1602A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part