18 open source boards using the DRV2605LDGS
Real designs built with the DRV2605LDGS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry PiUnfolding space hardware
jakobkilian
57 × 74.6 mm82 parts2LCC-BY-4.04
YEARLING KIT -Z
proveskit
100 × 100 mm41 parts4LCERN-OHL-W-2.03
Nordic nRFNrf52840-macro controller
alex1klimovich
96 × 74 mm72 parts2LNo license1
ESP8266IR Hub
madhukartemba
79 × 79 mm88 parts2LNo license0
ESP32Daronjli dongle
manhoosbilli1
45.2 × 29.7 mm50 parts4LNo license0
ESP32Esp32-bluetooth erm accel dongle faulty
23.3 × 28.4 mm50 parts4LNo license0
ESP32Esp32-dongle v0-1-ceramic antenna
11 × 50.8 mm47 parts4LNo license0
Daron necklace bottom board
20 × 20 mm42 parts2LNo license0
Yearling Kit XY Faces
83 × 98 mm33 parts4LCERN-OHL-W-2.03
Yearling Kit XY Faces
83 × 98 mm27 parts4LCERN-OHL-W-2.03
Yearling Kit XY Faces
83 × 98 mm25 parts4LCERN-OHL-W-2.03
Yearling Kit XY Faces
83 × 98 mm21 parts4LCERN-OHL-W-2.03
Yearling Kit XY Faces
83 × 98 mm21 parts4LCERN-OHL-W-2.03
YEARLING KIT -Z
100 × 100 mm21 parts4LCERN-OHL-W-2.03
YEARLING KIT -Z
SunnyYoshimitsu
80 × 80 mm8 parts4LNo license3
Haptic drv2605l
sadekbaroudi
25 × 42 mm12 parts2LCERN-OHL-P-2.0219
Yearling Kit XY Faces
83 × 212.6 mm19 parts4LCERN-OHL-W-2.03
Yearling Kit XY Faces
83 × 98 mm19 parts4LCERN-OHL-W-2.03
The DRV2605LDGS in open source designs
The gallery holds 18 open source boards using the DRV2605LDGS from 10 GitHub repositories; a typical one measures about 83 × 89 mm and carries around 30 components.
72% use four copper layers or more, and 61% carry an open source license.
The most starred is Haptic drv2605l by sadekbaroudi.
Parts used alongside the DRV2605LDGS
Microcontrollers on boards using the DRV2605LDGS
What boards using the DRV2605LDGS are built for
DRV2605LDGS: common questions
Where can I find a DRV2605LDGS reference design?
Each of the 18 boards on this page is a real design using the DRV2605LDGS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the DRV2605LDGS?
The LIS3DH, MCP73831-2-MC, CP2102N-Axx-xQFN24 and SY8089AAAC appear in the most repositories here.
Which microcontrollers do boards using the DRV2605LDGS use?
Most are built on ESP32 (3), ESP8266 (1), Nordic nRF (1) and Raspberry Pi (1).
How big is a typical board using the DRV2605LDGS?
The median is 83 × 89 mm, and 28% are two-layer designs.
What is the most popular open source board using the DRV2605LDGS?
By GitHub stars, Haptic drv2605l by sadekbaroudi, with 219 stars.
Can I simulate one of these boards using the DRV2605LDGS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.