18 open source boards using the TPS2553DBVR
Real designs built with the TPS2553DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP23500xCB 1337
0xCB-dev
62 × 62 mm114 parts4LCustom license60
Raspberry PiMesh radio-Halow-LoRa
ties1887
76 × 56 mm112 parts6LCC-BY-NC-4.036
STM32Overnumpad controller 1xb
purdeaandrei
69.6 × 37.3 mm65 parts2LCERN-OHL-P-2.027
RP2040/RP2350Chastity
brad-za
138.3 × 111 mm336 parts2LNo license4
ESP32PocketLab Card V1
Jebroa774
85.6 × 54 mm250 parts4LNo license2
ESP32Handset
JeremyLakeyJr
66 × 142 mm217 parts4LNo license0
ESP32Controller
micthiesen
150 × 110 mm99 parts4LNo license0
ADuM4165 USB Isolator
alxgmpr
120 × 50 mm41 parts4LNo license0
Linktovideo
danielboston38
59.9 × 59.7 mm20 parts2LCERN-OHL-S-2.00
RP2040/RP23500xCB 1337
137 × 141 mm114 parts4LCustom license60
RP2040/RP2350ChastityRightV2
137.3 × 111 mm286 parts2LNo license4
ESP32PocketLab Card V1
85.6 × 54 mm246 parts4LNo license2
ESP32Mesh phone
87 × 154 mm95 parts2LNo license0
AVR/Arduino0xCB 1337
62 × 62 mm53 parts2LCustom license60
ESP32PocketLab Card V1
85.6 × 54 mm243 parts4LNo license2
ESP32Owasso1-before rf ground finish
87 × 154 mm95 parts2LNo license0
AVR/ArduinoPanel
144 × 144 mm53 parts2LCustom license60
ESP32Owasso1-unrouted
87 × 154 mm95 parts2LNo license0
The TPS2553DBVR in open source designs
The gallery holds 18 open source boards using the TPS2553DBVR from 9 GitHub repositories; a typical one measures about 86.3 × 86 mm and carries around 106 components.
50% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.
The most starred is 0xCB 1337 by 0xCB-dev.
Parts used alongside the TPS2553DBVR
Microcontrollers on boards using the TPS2553DBVR
What boards using the TPS2553DBVR are built for
TPS2553DBVR: common questions
Where can I find a TPS2553DBVR reference design?
Each of the 18 boards on this page is a real design using the TPS2553DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TPS2553DBVR?
The USBLC6-2SC6, RP2040, TPS61023DRLR and TPS63070RNMR appear in the most repositories here.
Which microcontrollers do boards using the TPS2553DBVR use?
Most are built on ESP32 (8), RP2040/RP2350 (4), AVR/Arduino (2) and Raspberry Pi (1).
How big is a typical board using the TPS2553DBVR?
The median is 86.3 × 86 mm, and 50% are two-layer designs.
What is the most popular open source board using the TPS2553DBVR?
By GitHub stars, 0xCB 1337 by 0xCB-dev, with 60 stars.
Can I simulate one of these boards using the TPS2553DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.