16 open source boards using the FT2232H
Real designs built with the FT2232H, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGAIcezum
FPGAwars
68.6 × 53.3 mm208 parts4LGPL-3.0356
FPGASaturn
numato
62.8 × 57.5 mm151 partsNo license143
FPGAFmcw
matthuszagh
118.6 × 83.2 mm432 parts4LApache-2.066
FPGASpla
khaydarian
165 × 107 mm252 parts4LNo license32
FPGAM68k
annoyatron255
100 × 100 mm105 parts2LNo license24
Spartan6Dev
jonthomasson
89 × 61 mm180 parts4LNo license17
Rev3
Fifty-Nine
55.9 × 76.2 mm98 parts4LCERN-OHL-1.24
FPGAIceduino
RubenVoell
80 × 100 mm241 parts4LCERN-OHL-1.23
ESP32Turpial hardware
btcven
140 × 47 mm177 parts4LCERN-OHL-W-2.03
FPGAICE40hxk4 dev board
smartbench
67 × 157 mm379 parts4LNo license2
STM32Hyperion
AerodyneLabs
90.2 × 95.9 mm72 parts4LNo license1
NXPEdu ciaa nxp micropython
lmtreser
85.8 × 137 mm183 parts2LMIT0
NXPEdu ciaa nxp
AndyPecotche
85.8 × 137 mm183 parts2LBSD-3-Clause0
NXPEdu ciaa nxp
85.8 × 137 mm183 parts2LNo license0
FPGAFmcw nightly
94.6 × 83.4 mm424 parts4LApache-2.066
Ft2232h ice40
jkiv
34 × 22.4 mm35 parts4LCC-BY-NC-4.05
The FT2232H in open source designs
The gallery holds 16 open source boards using the FT2232H from 15 GitHub repositories; a typical one measures about 85.8 × 89.6 mm and carries around 183 components.
73% use four copper layers or more, and 50% carry an open source license.
The most starred is Icezum by FPGAwars.
Parts used alongside the FT2232H
What boards using the FT2232H are built for
FT2232H: common questions
Where can I find a FT2232H reference design?
Each of the 16 boards on this page is a real design using the FT2232H. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the FT2232H?
The TXB0108, 93C46, LPC4337JBD144, MIC2025 and NCP1117ST33T3G appear in the most repositories here.
Which microcontrollers do boards using the FT2232H use?
Most are built on FPGA (8), NXP (3), ESP32 (1) and STM32 (1).
How big is a typical board using the FT2232H?
The median is 85.8 × 89.6 mm, and 27% are two-layer designs.
What is the most popular open source board using the FT2232H?
By GitHub stars, Icezum by FPGAwars, with 356 stars.
Can I simulate one of these boards using the FT2232H before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.