19 open source boards using the STM32G030F6Px
Real designs built with the STM32G030F6Px, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
NitrogenGenerator
tinic
160 × 55 mm29 parts2LCustom license2STM32
Gran-Ornament
HenrikBiscuit
25.9 × 24.2 mm19 parts2LCustom license2STM32
USB C PD
JBeeBK
60 × 64.9 mm78 parts4LNo license1STM32
Wand
ayuusweetfish
63.2 × 23.9 mm65 parts2LCERN-OHL-S-2.01STM32
STM32G0F6Px-ROC
oxfordfish
50 × 50 mm53 parts2LCERN-OHL-P-2.01STM32
Player system
jkmunson
100 × 100 mm177 parts4LNo license0STM32
USB---C-Power-Delivery
RadoslavPantic
67 × 34 mm51 parts4LNo license0STM32
Resistance-Telemetry
ayuusweetfish
32.8 × 17 mm33 parts2LNo license0STM32
Floppy Voltmeter Clock
virgoss
43 × 72 mm32 parts2LCERN-OHL-S-2.00STM32
STM32G0-Core-Board
refe07
56.3 × 20 mm13 parts2LNo license0STM32
Kicad board-2026-07-21-homematic-6button flush
SimulatedFlow
50 × 50 mm12 parts4LCustom license0- schematic only · 18 partsSTM32
Space-Concordia-Intro-Task
Ch3ema
18 partsNo license0 STM32
Pendu
ayuusweetfish
36 × 20 mm26 parts2LCERN-OHL-S-2.01STM32
462FinalProject
jkmunson
30 × 100 mm46 parts2LNo license0STM32
Mallet
ayuusweetfish
19.5 × 27 mm24 parts2LCERN-OHL-S-2.01STM32
Mallet Cen
ayuusweetfish
49.1 × 22.8 mm23 parts2LCERN-OHL-S-2.01STM32
STM32G030F6P6
jay94ks
17.8 × 25.4 mm18 parts2LMIT0STM32
Player drum velocity
bmurauer
18 × 100 mm32 parts2LNo license0STM32
Player melodic
bmurauer
18 × 100 mm30 parts2LNo license0
How designs wire the STM32G030F6Px
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the STM32G030F6Px connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 12 of 13 designs, most often 100 nF (then 4.7 µF).
- The PC15 pin is left unconnected on 10 of 13 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PC15pin 3 | Connected to: Not connected 77% · a signal 15% | — |
| VDDpin 4 | Connected to: 3.3V 77% · a signal 15% |
|
| VSSpin 5 | Connected to: GND 100% | — |
| PA4pin 11 | Connected to: Signal 77% · not connected 23% |
|
| PA14/PA15pin 19 | Connected to: A connector 100% |
|
15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gran-Ornament by HenrikBiscuit, NitrogenGenerator by tinic, Mallet by ayuusweetfish and USB C PD by JBeeBK.
The STM32G030F6Px in open source designs
The gallery holds 19 open source boards using the STM32G030F6Px from 14 GitHub repositories; a typical one measures about 46 × 42 mm and carries around 30 components.
78% are two-layer designs, the rest use four layers or more, and 37% carry an open source license.
The most starred is NitrogenGenerator by tinic.
Parts used alongside the STM32G030F6Px
Microcontrollers on boards using the STM32G030F6Px
What boards using the STM32G030F6Px are built for
STM32G030F6Px: common questions
Where can I find a STM32G030F6Px reference design?
Each of the 19 boards on this page is a real design using the STM32G030F6Px. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32G030F6Px VDD pin?
The VDD pin has a decoupling capacitor on 12 of 13 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 13 open source designs using the STM32G030F6Px.
How is the STM32G030F6Px PC15 pin connected?
The PC15 pin is left unconnected on 10 of 13 designs (a signal on 2). Counted from the KiCad layouts of 13 open source designs using the STM32G030F6Px.
Which microcontrollers do boards using the STM32G030F6Px use?
Most are built on STM32 (19).
How big is a typical board using the STM32G030F6Px?
The median is 46 × 42 mm, and 78% are two-layer designs.
What is the most popular open source board using the STM32G030F6Px?
By GitHub stars, NitrogenGenerator by tinic, with 2 stars.
Can I simulate one of these boards using the STM32G030F6Px before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.