22 open source boards using the LIS3DH
Real designs built with the LIS3DH, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Dml10
jonnor
52 × 26 mm39 parts2LNo license315
ESP32Blinkekatze
TobleMiner
83 × 83 mm106 parts4LNo license33
STM32Tracker v1
angelnu
56.5 × 66.8 mm36 parts2LMIT22
AVR/ArduinoTtntrackernode
ttnmapper
48 × 75 mm82 parts2LNo license13
Xilwatch hw
xil-se
37.8 × 50 mm64 parts2LNo license2
STM32Heart
lime7git
47.6 × 45.2 mm56 parts4LNo license2
NXPSnap badge hardware
synapse-wireless
63.5 × 127 mm138 parts2LNo license1
ESP32Nerf-ATG-Electronics
nico25112005
56 × 38 mm87 parts4LCC-BY-NC-4.01
ESP8266Endev v1.1
sophiayduan
36 × 70 mm59 parts2LMIT1
Microchip SAMSamd51 gps alarm clock
KrHaaland
80 × 50 mm149 parts2LNo license0
RP2040/RP2350Christmas-Ornament-2024
jacobantoun
81.4 × 91.5 mm79 parts4LNo license0
ESP32Daronjli dongle
manhoosbilli1
45.2 × 29.7 mm50 parts4LNo license0
ESP32Esp32-bluetooth erm accel dongle faulty
23.3 × 28.4 mm50 parts4LNo license0
ESP32Esp32-dongle v0-1-ceramic antenna
11 × 50.8 mm47 parts4LNo license0
ESP32SmartPetCollar
8aChristian
69 × 41 mm30 parts2LMIT0
Nordic nRFFishping
DjukicAleksej
44.2 × 44.2 mm10 parts2LMIT0
ESP32Pot watering controller v1
64.6 × 87.1 mm38 parts2LApache-2.024
Microchip SAMGNSS Alarm Clock
80 × 50 mm146 parts4LNo license0
AVR/ArduinoAdafruit Circuit Playground
humancomputerintegration
61 × 60 mm78 parts16LGPL-3.03
AVR/ArduinoXDuinoRail-Protoboard
chatelao
100 × 100 mm42 parts2LAGPL-3.00
STM32Glove v1
aykevl
15 × 20 mm19 parts2LNo license81
ESP32XDuinoRailShield
34.3 × 19.7 mm28 parts4LAGPL-3.00
The LIS3DH in open source designs
The gallery holds 22 open source boards using the LIS3DH from 20 GitHub repositories; a typical one measures about 54 × 50 mm and carries around 53 components.
55% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.
The most starred is Dml10 by jonnor.
Parts used alongside the LIS3DH
Microcontrollers on boards using the LIS3DH
What boards using the LIS3DH are built for
LIS3DH: common questions
Where can I find a LIS3DH reference design?
Each of the 22 boards on this page is a real design using the LIS3DH. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LIS3DH?
The AMS1117-3.3, DRV2605LDGS, CP2102N-Axx-xQFN24, MCP73831-2-MC and SY8089AAAC appear in the most repositories here.
Which microcontrollers do boards using the LIS3DH use?
Most are built on ESP32 (8), AVR/Arduino (3), STM32 (3) and Microchip SAM (2).
How big is a typical board using the LIS3DH?
The median is 54 × 50 mm, and 55% are two-layer designs.
What is the most popular open source board using the LIS3DH?
By GitHub stars, Dml10 by jonnor, with 315 stars.
Can I simulate one of these boards using the LIS3DH before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.