35 open source boards using the 74HC541

Real designs built with the 74HC541, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

35 boardsClear filters|Most starred

How designs wire the 74HC541

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the 74HC541 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 10 of 14 designs, most often 100 nF.
GNDpin 10Connected to: GND 100%
VCCpin 20Connected to: 5V 100%
  • Decoupling capacitor on 71% · 100 nF (9)

18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 1002 EPROM EMU NG by Kris-Sekula, HD6309 computer by trcwm, Zf vga by tangent3D and CFT Processor Board 0 by alexiosc.

The 74HC541 in open source designs

The gallery holds 35 open source boards using the 74HC541 from 15 GitHub repositories; a typical one measures about 169.5 × 114 mm and carries around 99 components.

79% are two-layer designs, the rest use four layers or more, and 51% carry an open source license.

The most starred is 1002 EPROM EMU NG 1.9 by Kris-Sekula.

Microcontrollers on boards using the 74HC541

74HC541: common questions

Where can I find a 74HC541 reference design?

Each of the 35 boards on this page is a real design using the 74HC541. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HC541 VCC pin?

The VCC pin has a decoupling capacitor on 10 of 14 designs, most often 100 nF. Counted from the KiCad layouts of 14 open source designs using the 74HC541.

What parts are used alongside the 74HC541?

The 74HC00, 74HC04, 74HC08, 74HC74 and 74HC14 appear in the most repositories here.

Which microcontrollers do boards using the 74HC541 use?

Most are built on AVR/Arduino (7) and PIC (1).

How big is a typical board using the 74HC541?

The median is 169.5 × 114 mm, and 79% are two-layer designs.

What is the most popular open source board using the 74HC541?

By GitHub stars, 1002 EPROM EMU NG 1.9 by Kris-Sekula, with 161 stars.

Can I simulate one of these boards using the 74HC541 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part