27 open source boards using the ESP32-WROVER
Real designs built with the ESP32-WROVER, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32ClimateSprinklerController
kbx81
217 × 108 mm189 parts2LNo license54
ESP32Zerowriter Inkplate 5 Gen2
zerowriter
130.6 × 75.2 mm252 parts2LGPL-3.046
ESP32Inkplate10 Soldered
SolderedElectronics
224.8 × 162.4 mm215 parts2LTAPR-OHL-1.017
ESP32Pcb
brainsmoke
60 × 50 mm69 parts2LNo license11
ESP32Edgedriver
82.8 × 70.7 mm26 parts2LNo license7
ESP32Soldered Inkplate 4 TEMPERA with glass panel
72 × 78 mm246 parts4LTAPR-OHL-1.05
ESP32Soldered Inkplate 6
144.4 × 107.8 mm224 parts2LTAPR-OHL-1.05
ESP32Epaper breakout
jifanchn
100 × 45 mm98 parts4LNo license5
ESP32PowerMonitorMK3
MAWoodMain
125 × 41 mm86 parts2LNo license5
ESP32Soldered Inkplate 5 Gen2
130.6 × 75.2 mm258 parts2LTAPR-OHL-1.04
ESP32Soldered Inkplate 6COLOR
131.4 × 105.5 mm177 parts2LTAPR-OHL-1.03
ESP32Dasduino-CONNECTPLUS-hardware design
63 × 25.9 mm51 parts2LTAPR-OHL-1.03
ESP32Soldered Inkplate 6PLUS
144.4 × 107.8 mm242 parts2LTAPR-OHL-1.02
ESP32Soldered Inkplate 6 FLICK
150.4 × 107.8 mm329 parts2LTAPR-OHL-1.01
ESP32Soldered Inkplate 6PLUS
144.4 × 107.8 mm242 parts2LTAPR-OHL-1.01
ESP32Soldered Inkplate 10
224.8 × 162.4 mm215 parts2LTAPR-OHL-1.017
ESP32Soldered Inkplate 4 TEMPERA with glass panel panel
1.9 × 12 mm246 parts4LTAPR-OHL-1.05
ESP32Inkplate 6 SS panel
294.8 × 119.8 mm223 parts2LTAPR-OHL-1.05
ESP32Soldered Inkplate 5 Gen2 panel
8.2 × 17.5 mm258 parts2LTAPR-OHL-1.04
ESP32Inkplate6COLOR Soldered panel
268.8 × 117.5 mm176 parts2LTAPR-OHL-1.03
ESP32Inkplate 6PLUS panel
294.8 × 119.8 mm241 parts2LTAPR-OHL-1.02
ESP32Soldered Inkplate 6 FLICK panel
33.7 × 6.2 mm329 parts2LTAPR-OHL-1.01
ESP32Inkplate 6PLUS panel
294.8 × 119.8 mm241 parts2LTAPR-OHL-1.01
ESP32Inkplate10 Soldered panel
224.8 × 174.4 mm214 parts2LTAPR-OHL-1.017
ESP32Soldered Inkplate 6FLICK Gen2
144.4 × 107.8 mm247 parts2LTAPR-OHL-1.01
ESP32ESP32-wroover adapter
pcbreflux
27 × 37 mm6 parts2LGPL-3.0608
ESP32ESP32-wroover adapter pan
37 × 81 mm6 parts2LGPL-3.0608
The ESP32-WROVER in open source designs
The gallery holds 27 open source boards using the ESP32-WROVER from 16 GitHub repositories; a typical one measures about 131.4 × 105.5 mm and carries around 223 components.
89% are two-layer designs, the rest use four layers or more, and 81% carry an open source license.
The most starred is ESP32-wroover adapter pan by pcbreflux.
Parts used alongside the ESP32-WROVER
Microcontrollers on boards using the ESP32-WROVER
What boards using the ESP32-WROVER are built for
ESP32-WROVER: common questions
Where can I find a ESP32-WROVER reference design?
Each of the 27 boards on this page is a real design using the ESP32-WROVER. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ESP32-WROVER?
The CH340C, TPS7A2633DRVR, PCAL6416AHF,128, PCF85063A and TPS3840PL27DBVR appear in the most repositories here.
Which microcontrollers do boards using the ESP32-WROVER use?
Most are built on ESP32 (27).
How big is a typical board using the ESP32-WROVER?
The median is 131.4 × 105.5 mm, and 89% are two-layer designs.
What is the most popular open source board using the ESP32-WROVER?
By GitHub stars, ESP32-wroover adapter pan by pcbreflux, with 608 stars.
Can I simulate one of these boards using the ESP32-WROVER before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.