31 open source boards using the MCP2562
Real designs built with the MCP2562, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32R1 panel
cuspaceflight
50 × 50 mm176 parts2LNo license93
MCU Powertrain
mark-belbin
108 × 54 mm152 parts4LGPL-3.041
NXPKbox hardware
sarfata
100 × 54 mm102 parts2LNo license19
STM32M4psu
269 × 155 mm246 parts2LNo license8
PICMarine GPS
mbouyer
160 × 100 mm107 parts2LBSD-2-Clause6
C6021light
deltaphi
100 × 50 mm74 parts2LGPL-3.05
PICThermocouple board
waterloo-rocketry
73.9 × 56.6 mm59 parts2LNo license5
PICCommand
69.9 × 84.8 mm34 parts2LBSD-2-Clause2
STM32Scot resolver
philcrump
108.6 × 79.4 mm137 parts2LMIT1
PICAll in One Railroad Interface
GBert
85 × 56.5 mm151 parts2LNo license99
STM32SRAD Altimeter
71.4 × 71.4 mm133 parts4LGPL-3.014
STM32M4pyro
100 × 74.9 mm165 parts2LNo license8
PICControl main
71.1 × 72.4 mm27 parts2LBSD-2-Clause2
STM32M3PSU - MCU Board
40 × 40 mm151 parts2LNo license93
PICPropulsionBoard
56.9 × 61.3 mm99 parts2LGPL-3.014
PICCapteur
69.9 × 60 mm26 parts2LBSD-2-Clause2
STM32M3PSU - DC/DC 5V Board
39.5 × 39.5 mm140 parts2LNo license93
PICRocket power board
33 × 58.4 mm79 parts4LGPL-3.014
PICRemote control
74 × 34 mm24 parts2LBSD-2-Clause2
PICRemote arming
68.9 × 41.5 mm61 parts4LGPL-3.014
AVR/ArduinoDriveControllerLogic
UofSSpaceTeam
85.6 × 51.9 mm66 parts2LNo license5
STM32Brushless board
robotronik
60 × 62.5 mm57 parts2LNo license1
STM32M3radio
39.5 × 39.5 mm66 parts2LNo license93
PICInjector sensor hub
58.4 × 45.7 mm58 parts2LGPL-3.014
STM32Base
40 × 33 mm45 parts2LNo license93
STM32Processor Board 2025
48.9 × 52.1 mm57 parts4LGPL-3.014
PiMainboard
116 × 72.3 mm32 parts2LNo license5
RPi-MCP2515
65 × 56.5 mm42 parts2LNo license99
STM32Main
40 × 40 mm39 parts2LNo license93
PICGPS Board
54.3 × 28.9 mm41 parts2LGPL-3.014
PICDAQ CAN support
86.4 × 35.1 mm31 parts2LGPL-3.014
The MCP2562 in open source designs
The gallery holds 31 open source boards using the MCP2562 from 13 GitHub repositories; a typical one measures about 69.8 × 54 mm and carries around 66 components.
84% are two-layer designs, the rest use four layers or more, and 52% carry an open source license.
The most starred is All in One Railroad Interface by GBert.
Parts used alongside the MCP2562
Microcontrollers on boards using the MCP2562
What boards using the MCP2562 are built for
MCP2562: common questions
Where can I find a MCP2562 reference design?
Each of the 31 boards on this page is a real design using the MCP2562. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MCP2562?
The MCP2515, L7805, LM393, LTC4151 and STM32F405RxTx appear in the most repositories here.
Which microcontrollers do boards using the MCP2562 use?
Most are built on PIC (13), STM32 (12), AVR/Arduino (1) and NXP (1).
How big is a typical board using the MCP2562?
The median is 69.8 × 54 mm, and 84% are two-layer designs.
What is the most popular open source board using the MCP2562?
By GitHub stars, All in One Railroad Interface by GBert, with 99 stars.
Can I simulate one of these boards using the MCP2562 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.