47 open source boards using the ADS1115IDGS
Real designs built with the ADS1115IDGS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry PiBcflight
dridri
66.3 × 40.2 mm56 parts4LGPL-3.0169
RP2040/RP2350Stradex1
Bylin-code
192.1 × 126.9 mm24 parts4LNo license101
Raspberry PiExpansion board
reubenstr
100 × 49.8 mm75 parts4LMIT51
UPD-board
uniclogs
140.7 × 86.5 mm184 parts2LGPL-3.031
HFLink
LX050724
48.5 × 33.5 mm111 parts4LApache-2.024- schematic only · 25 partsRaspberry Pi
Interfacing-Laptop-Battery-With-RaspberryPi
omarKmekkawy
25 partsNo license18 
ESP32IoT12 Control Board
atoomnetmarc
99.1 × 69.9 mm66 parts2LApache-2.014
ESP32ESPHome-Indoor-Multi-Sensor
mikelawrence
52.5 × 59.7 mm97 parts4LCERN-OHL-P-2.012
RP2040/RP2350YamhillFrontPanel
NT7S
170 × 100 mm207 parts4LNo license9
AVR/ArduinoController board
andia89
69 × 54 mm73 parts2LNo license6
ESP8266Bewaesserung
SmartHome-yourself
96.5 × 76.2 mm57 parts2LGPL-2.06
AVR/ArduinoSmart penetrometer v0.4.0
ARTS-Laboratory
33 × 74.9 mm44 parts2LCC-BY-SA-4.06- schematic only · 24 parts
Opentdcs
nathanfu88
24 partsCustom license5 
AVR/ArduinoSatelliteController2.0
tokai-student-rocket-project
150 × 100 mm221 parts2LMIT2
RP2040/RP2350Nyu openplc te
kiwih
155 × 108 mm153 parts2LGPL-3.02
ESP32Aqm envcity hw
MateusMaruzka
100 × 100 mm132 parts2LNo license2
ESP32PCB Watersysteem
Vertical-Farming-IB3
89.3 × 100 mm88 parts2LNo license2
Handheld Gaming device
DhairyaAPImaster
180.5 × 81.8 mm60 parts2LNo license2
ESP3230a water heater controller
flaviut
85 × 56 mm42 parts2LCERN-OHL-S-2.02
Sun sensor
vatsalbansal123
26 × 19 mm25 parts2LNo license2
ESP32Kronos-Hardware
AddeyX
65.6 × 91.8 mm144 parts4LNo license1
Deltavr controller
oxy-2
70 × 70 mm46 parts2LMIT1
AVR/ArduinoDiy ert
CainPatel
127 × 117.5 mm44 parts2LMIT1- schematic only · 31 partsESP32
Urine analyzer lite
Sid93
31 parts2LNo license1 
AVR/ArduinoDigital synth
giacomogramaglia
165 × 90.1 mm135 parts2LNo license0
ESP32Rev0
Hasatio
67.3 × 96.9 mm125 parts2LNo license0
ESP32Nft hydroponic controller
hasan-abuzaid
135 × 101.3 mm97 parts4LCERN-OHL-S-2.00
ESP8266PeterThePowerMeter
CtrlAltJon
57.5 × 79 mm76 parts2LMIT0
ESP32Microcontroller Schematics
AlexFinns
79.4 × 70 mm49 parts2LNo license0
ESP32RC14
AgOpenGPS-Official
145 × 108 mm88 parts2LGPL-3.020
ESP32Stencil
52.5 × 59.7 mm97 parts4LCERN-OHL-P-2.012
AVR/ArduinoSmart penetrometer.kicad pro
29 × 93.3 mm32 parts4LCC-BY-SA-4.06
Handheld Panel
337.8 × 95.8 mm58 parts2LNo license2
Heater
zapta
90 × 88.4 mm69 parts2LNo license1
ESP32Rev1
67.3 × 96.9 mm108 parts2LNo license0
SMD Microcontroller Schematics
78.7 × 59.7 mm28 parts4LNo license0
The ADS1115IDGS in open source designs
The gallery holds 47 open source boards using the ADS1115IDGS from 35 GitHub repositories; a typical one measures about 74.3 × 74.9 mm and carries around 58 components.
67% are two-layer designs, the rest use four layers or more, and 51% carry an open source license.
The most starred is Bcflight by dridri.
Parts used alongside the ADS1115IDGS
Microcontrollers on boards using the ADS1115IDGS
What boards using the ADS1115IDGS are built for
ADS1115IDGS: common questions
Where can I find a ADS1115IDGS reference design?
Each of the 47 boards on this page is a real design using the ADS1115IDGS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ADS1115IDGS?
The AMS1117-3.3, CH340C, LM2596S-5, 24LC256 and Arduino_Nano_v3.x appear in the most repositories here.
Which microcontrollers do boards using the ADS1115IDGS use?
Most are built on ESP32 (14), AVR/Arduino (10), Raspberry Pi (3) and RP2040/RP2350 (3).
How big is a typical board using the ADS1115IDGS?
The median is 74.3 × 74.9 mm, and 67% are two-layer designs.
What is the most popular open source board using the ADS1115IDGS?
By GitHub stars, Bcflight by dridri, with 169 stars.
Can I simulate one of these boards using the ADS1115IDGS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.