HardLabs

Open source PCB designs you can simulate

23,833 boards

Every public KiCad project we can find on GitHub, with its processor, full parts list and a render of the board. Any of them can be brought up in simulation: open one and run firmware on it before you order a single PCB.

67 boardsClear filtersOpen license only|Most starredRecently updatedMost components

About these open source PCB designs

Every board here is a published hardware project: a public GitHub repository with KiCad design files and a bill of materials. HardLabs reads those files directly — the board outline for its size, the copper layers, every footprint for the parts list — and draws the render from the layout itself, so what you see is the design as committed rather than a product photo.

Boards are indexed by the microcontroller they are built around, by what they are for, and by every IC and module on them. That makes the gallery a quick way to find a reference design: look up a part number to see how other engineers power, decouple and connect it.

Using an open source board as a reference design

  1. Find boards built on your chip or with the part you are designing around.
  2. Compare their size, layer count and bill of materials, and open the KiCad files on GitHub.
  3. Check the license before reusing any of the design.
  4. Simulate the firmware on HardLabs to test your changes before you order a PCB.

Open source PCB designs: common questions

What is an open source PCB?

A printed circuit board whose design files — schematic, layout and bill of materials — are published for anyone to study and, depending on the license, to modify and manufacture.

Are these PCB designs free to use?

It depends on each project's license. Open hardware licenses such as CERN-OHL and CC BY-SA, and software licenses such as MIT, allow reuse on their terms; a repository with no license keeps all rights with its author. Every board page shows its license.

What design files do the boards come with?

They are KiCad projects: the .kicad_pcb layout and the schematic (or a netlist from older KiCad versions), plus a bill of materials, usually a CSV. Each board page links to those files in the original GitHub repository.

How do I find boards that use a specific part?

Search for the part number, or open the part's page from the list of parts. It shows every board built with that part and the parts most often used alongside it.

How many boards are there, and how often is the list updated?

23,833 boards from 12,066 repositories today. New projects are found and added every night.

Can I test a board's firmware before ordering the PCB?

Yes. HardLabs builds a simulation of a board from its netlist and BOM, so you can boot and debug firmware against it with no hardware on your desk.

Browse boards by part

AMS1117-3.3 1014USBLC6-2SC6 819RP2040 607W25Q128JVS 382TL072 308AP2112K-3.3 300TL074 274ESP32-S3-WROOM-1 258CH340C 241L7805 223Pico 21874HC595 210USBLC6-2P6 199LM358 18674LS04 173AP2112K-3.3TRG1 172ESP32-WROOM-32 165SRV05-4 163Arduino_Nano_v3.x 15674LS245 155LM7805_TO220 15274LS138 151W25Q128JVSIQ 15074LS32 146
Open source PCB designs and KiCad projects — by chip and part · HardLabs